Tektronix Phasershare Printer manual Field name Example entry Description

TCP/IP Host Configuration (UNIX) 8

5.Perform the appropriate step for your HP-UX version:

■Version 9.x. Highlight Printers and Plotters from the menu. Press Return or click Open.

■Version 10.x. Double-click the Printers and Plotters icon.

6.Perform the appropriate step for your HP-UX version:

■Version 9.x. Highlight Printers/Plotters from the menu. Press Return or click Open.

■Version 10.x. Again, double-click the Printers and Plotters icon.

7.From the Actions menu, select Add Remote Printer/Plotter.

8.Fill in the fields. See the following table for example entries

and descriptions. Access SAM's help utility for additional information about these fields.

Field name	Example entry	Description
Printer Name	phaser360PS	The name you use to access the printer.
		You can use any name you want.
Remote System name	tekphaser	The name that you entered in your
		/etc/hosts file as the remote
		machine name.
Remote Printer name	PS	Queue name that the printer recognizes:
		■	PS for PostScript
		■	PCL for text
		■	HPGL for HP7475A
		■ AUTO for automatic selection.
Remote cancel model	rcmodel	-
Remote status model	rsmodel	-
Printer class (version 9.x)	-	Optional
Remote printer is on a	-	Check the box for a BSD system.
BSD system?

9.To save your changes, click OK at the bottom of the window.

10.When you are asked about sending a test file to the printer, type no. (It is recommended that you do not let SAM send a test file because it may not be compatible with your printer.)

11.Exit SAM:

a.From the File menu, select Exit.

b.Click Exit SAM.

PhaserShare Networking Manual 93