Tektronix Phasershare Printer manual Phaser 840 Intelligent Ready, 129

Printer Management 13

Phaser 840 Intelligent Ready

Intelligent Ready is an automated system that monitors the Phaser 840 printer’s usage and warms up the printer when you are most likely to need it. You can turn Intelligent Ready on or off from the printer’s front panel. Using PhaserLink Printer Management Software, you can control when the printer automatically warm s up.

Enabling and disabling Intelligent Ready from the front panel

1.In the front panel, scroll to Menu; press Select.

2.Scroll to Printer Configuration; press Select.

3.Scroll to Default Printer Settings; press Select.

4.Scroll to Advanced Printer Settings; press Select.

5.Scroll to Intelligent Ready. Press Select to turn this option on or off.

6.Scroll to Exit; press Select to return to the Ready to Print message.

Setting up Intelligent Ready using PhaserLink Printer Management Software

1.On any PhaserLink page, click Configuration. This displays the View and Configure Settings page.

2.From the View and Configure Settings page, click View and Configure Intelligent Ready Settings. This displays the View and Configure Intelligent Ready Settings page.

3.Select a Warmup Mode:

■Intelligent. In this mode, the printer monitors usage patterns and warms up automatically when you are most likely to need it.

■Scheduled. This mode allows you to specify a warmup time for each day of the week. If you select this mode, use the Sunday through Saturday fields to select warmup times.

■Job Activated. In this mode, the printer warms up when it receives a print job.

4.If a validation password has been assigned, enter the password to make the change to take effect.

N O T E

PhaserLink passwords are not encrypted.

5.Click Do/Apply.

PhaserShare Networking Manual 129