Tektronix Phasershare Printer manual Configuration software for NetWare, Printing the Configuration

Novell NetWare Configuration 4

Configuration software for NetWare

Windows software

■PhaserShare Administrator (Tektronix). Use this application to configure the printer and the network when using NetWare 3.x and 4.x.

■NWAdmin (Novell). Use this utility to manage existing queues on networks running NetWare 4.x in NDS mode.

DOS software

■NWSET (Tektronix). Use this application to configure the printer with NetWare 3.x and 4.x. For more information on NWSET, see the README file in the NETWARE directory of the printer’s or CD-ROM.

■NWCONFIG.PS (Tektronix utility file). In DOS environments and other non-Windows environments, you can use this to configure the printer for NetWare 4.x networks. The PostScript code contained in the file NWCONFIG.PS is also available in a Macintosh file called Configure NetWare. For more information on NWCONFIG.PS, see the README file in the UTILS directory of the printer’s or CD-ROM. For more information on Configure NetWare, see the ReadMe file in the Network Utilities directory of the printer’s or CD-ROM.

■PCONSOLE (Novell). Use this utility to manage existing queues with NetWare 3.x and 4.x (both Bindery and NDS modes).

NetWare configuration for Windows environments

This is a quick configuration procedure using the Tektronix PhaserShare Administrator. For information on installing the PhaserShare Administrator, see Chapter 5, “PhaserShare Administrator Software for NetWare Networks”. For detailed information on the PhaserShare Administrator, functions, see the PhaserShare Administrator on-line help.

Printing the Configuration Page

Your printer’s Configuration Page reports information that you need for NetWare configuration. For information on printing a Configuration Page, see “The printer’s Configuration Page” on page 6.

N O T E

On the printer’s Configuration Page, all zeros in one or more of the IPX Networks fields indicates that the printer does not recognize the network connection; this probably indicates a faulty cable connection, an incorrect frame type, or Reply to Get Nearest Server has not been set to on. It must be set to on for at least one file server or router on the same segment as the printer.

PhaserShare Networking Manual 33