Tektronix Phasershare Printer manual Setting Snmp parameters using a PostScript utility file

7 TCP/IP Printer Configuration (All Platforms)

Setting SNMP parameters using a PostScript utility file

To create a PostScript file to control these parameters, use the script config-SNMPprovided with the printer’s network utilities software.

1.Connect the printer to the network.

2.Run the script config-SNMP:

a.Change (cd) to the bin subdirectory in the directory where you placed your printer’s network utilities.

b.Run the script, redirecting the output to a file. Type: config-SNMP > filename

3.When prompted, provide the information for the SNMP utility.

4.Send the file named in Step 2b to the printer using lp or lpr.

82PhaserShare Networking Manual