Tektronix Phasershare Printer manual Printer Menu Network Settings

PhaserShare Series B Network Interfaces 2

Setting Frame Routing from the Phaser 780 printer front panel

When the Token Ring card is installed in the printer, you can set the Frame Routing from the printer’s front panel. The choices are Transparent (no source routing) or Source Route (use source routing).

1.While Ready is displayed, press Select; the Printer menu is displayed:

Printer Menu
Help Pages	Menu

2.Press the left or right arrow buttons until the front panel displays Network Settings.

Printer	Menu
Network	Settings	Menu

3.Press Menu to enter the Network Settings menu; the front panel displays:

Network Settings
Token Ring	Menu

4.Press Menu again; the front panel displays the first of two Frame Routing choices.

5.Select the desired Frame Routing: Transparent or Source Route:

a.Press the right arrow button until the Frame Routing choice you want is displayed.

b.Press Select to enter your choice into the printer; the front panel briefly displays Selected, then displays the selected Frame Routing choice again.

6.Return the printer to normal operation:

a.Press Exit (the far right button) until the front panel displays:

Network Settings
Token Ring	Menu

b.Press Exit again.

■If you have changed any parameters that require a printer reset to take effect, you will be prompted to reset the printer. If you press Confirm, the printer resets. To return to normal operation without resetting the printer, press Exit (the far right button); Printer Menu appears on the top line of the display. Press Exit again; the printer returns to normal operation, but the changes you have made will not take effect until the next time the printer is reset.

■If you have not changed any parameters that require a printer reset, press Exit again; the front panel displays Ready.

PhaserShare Networking Manual 17