11 Windows 95 and Windows 98: PhaserPort Software
PhaserPort software installation
Using the installer
You can install PhaserPort software using the installer on your printer’s software
1.Put the printer’s software
■If the Windows autorun feature is enabled, the
■If the Windows autorun feature is disabled,
2.View the brief introductory information, then click Install Drivers to launch the installer.
3.When you are prompted to select Easy Install or Custom Install, select Custom Install.
4.During custom installation, a dialog is displayed enabling you to select the options you want to install. Check the box for PhaserPort. To install the drivers and PPD files for your printer, check the box for Drivers/PPDs (this is recommended for
Create your first port and install the printer
1.After the PhaserPort software is installed, the Add PhaserPort dialog is displayed. Create your first port:
a.In the Description field, enter a name for the port (this can be the printer name/model, location, or any other descriptive name of your choice), such as Phaser 740.
b.In the Name/Address field, enter the IP address or DNS name of the printer (for example, 192.1.1.2).
If you don’t know the printer’s IP address or DNS name, click Browse to display a list of printers on the network.
c.Click OK.
2.You are asked if you want to install the PhaserShare Administrator software. Install the PhaserShare Administrator software if you also want to print using NetWare.