Tektronix Phasershare Printer manual Phaser 360 printer, 163

Disabling Protocols 15

Phaser 360 printer

1.Press Menu; the front panel displays Help Pages.

2.Enter the Network Settings menu by pressing ---->or <----until the front panel displays Network Settings.

3.Press Menu; the front panel displays TCP/IP.

4.Disabling TCP/IP:

a.Press Menu; the front panel displays Enable Interface.

b.Press Menu again to display the current status of the protocol: Interface:On or Interface:Off. The current status is marked with an asterisk (*) in the upper-right corner of the display.

c.Press ---->until the front panel displays Interface:Off.

d.Press OK to disable the protocol; the front panel briefly displays

Selected, then it displays Enable Interface.

e.Press Exit to return to the TCP/IP display.

5.Disabling EtherTalk (or TokenTalk): To return the printer to normal operation, go immediately to Step 8; to continue and disable EtherTalk (or TokenTalk), follow these steps:

a.Press ---->; the front panel displays EtherTalk or (TokenTalk).

b.Press Menu; the front panel displays the current status of the protocol: Enabled or Disabled. The current status is marked with an asterisk (*) in the upper-right corner of the display.

c.Press ---->until the front panel displays Disabled.

d.Press OK to disable the protocol; the front panel briefly displays

Selected, then it displays EtherTalk or (TokenTalk).

6.Disabling NetWare: To return the printer to normal operation, go immediately to Step 8; to continue and disable the NetWare protocol, follow these steps:

a.Press ---->; the front panel displays NetWare.

b.Press Menu again; the front panel displays Enable Interface.

c.Press Menu to display the current status of the protocol: Interface:On or Interface:Off. The current status is marked with an asterisk (*) in the upper-right corner of the display.

d.Press ---->until the front panel displays Interface:Off.

e.Press OK to disable the protocol; the front panel briefly displays

Selected, then it displays Enable Interface.

f.Press Exit to return to the NetWare display.

PhaserShare Networking Manual 163