Tektronix Phasershare Printer manual Hewlett-Packard HP-UX 9.x, Print server

8 TCP/IP Host Configuration (UNIX)

5.Fill in the fields; refer to the following table.

Field name	Description
Attachment Type	Select remote.
Type of Remote Printing	Select Local filtering before sending to
	print server.
Remote Printer Type	Select Other, then generic.
Name of NEW print queues to add	Use the down-arrow key to move down to
	PostScript, then enter the print queue name
	on the right side. This can be anything.
HOSTNAME of remote server	The name that you entered in your /etc/hosts
	file as the remote machine name.
Name of QUEUE on remote server	Queue name that the printer recognizes:
	■	PS for PostScript
	■	PCL for text
	■	HPGL for HP7475A
	■ AUTO for automatic selection.
TYPE of print spooler on remote	Press F4 and select BSD.
server
Send PASS-THROUGH FLAG to	Select F4 and select no.
queue on remote server?

6.To process the information, press Enter. Make sure that SMIT finishes with an OK in the upper left hand corner. To return to the first Printer/Plotter Devices menu, press F3.

Hewlett-Packard HP-UX 9.x and 10.x

1.Log in as root on your workstation.

2.Make a backup copy of the /etc/hosts file.

N O T E

You need superuser privileges to edit this file.

3.Edit /etc/hosts and add a line that defines the printer's IP address and its remote machine name.

The IP address you enter here for the printer must be the same address you specified as the Tektronix printer IP address when you configured the printer. For example:

134.62.33.138 tekphaser

In this example, 134.62.33.138 is the printer's IP address and tekphaser is the printer's remote system name.

4.Use the HP System Administrator Manager program (SAM) to configure an HP workstation. From the command line, type: sam.

92PhaserShare Networking Manual