Tektronix Phasershare Printer manual Obtaining networking software for Phaser 360 printers

Network Printing with Tektronix Color Printers 1

Obtaining networking software for Phaser 360 printers

You obtain the networking software from the CD-ROM by running the installer:

1.Locate and run the installer on the printer’s CD-ROM. On a PC, the file is SETUP.EXE; on a Macintosh, it is Phaser 360 Installer.

2.When you are prompted to select Easy Install or Custom Install, select Custom Install.

3.In the Custom Install dialog box, check the box for Network Utilities.

4.If you are running the installer on a computer that has NetWare software installed, you can also check the boxes to install the PhaserShare Administrator software. For more information on the PhaserShare Administrator software, see Chapter 5, “PhaserShare Administrator Software for NetWare Networks”.

5.To complete the installation, follow the on-screen prompts.

Network administration software

	The following table lists the network administration software according to
	environment (network protocol, platform, and printer).
Network administration software
Environment	Software
NetWare; Windows 95,	Network queue configuration: PhaserShare Administrator (Novell PCONSOLE
Windows NT, and	and NWAdmin can also be used.)
Windows 3.1	Printer configuration: PhaserShare Administrator (Over TCP/IP, PhaserLink
	Printer Management Software can also be used; Novell’s PCONSOLE and
	NWAdmin cannot configure the PhaserShare network interface.)
	Printer status monitoring: Windows Print Monitor (over TCP/IP, PhaserLink
	Printer Management Software can also be used; PhaserLink Printer Management
	Software provides status on additional Tektronix printer features.)
TCP/IP; Windows 95 and	Printer configuration: PhaserLink Printer Management Software
Windows 3.1	Printer status monitoring: PhaserLink Printer Management Software
TCP/IP; Windows NT	Printer configuration: PhaserLink Printer Management Software (PhaserLink
	Printer Management Software does not set up queues on the print server.)
	Printer status monitoring: PhaserLink Printer Management Software
AppleTalk; Macintosh 7.x	Printer configuration: PhaserLink Printer Management Software (MacTCP or
and 8.x	Open Transport required)
	Printer status monitoring: PhaserLink Printer Management Software (MacTCP
	or Open Transport required)
TCP/IP; UNIX	Printer configuration: PhaserLink Printer Management Software (If using
	PhaserPrint for UNIX for printing, use PhaserPrint to set up print queues.)

Printer status monitoring: PhaserLink Printer Management Software

PhaserShare Networking Manual 9