APC AP9606 manual Methods, Interface Security Access

Security

Authentication continued

Summary of access The following table describes each interface and its access methods.
methods
	Interface	Security Access	Notes
	Serial Control	Access is by user name and	Always enabled.
	Console	password.
	Telnet Control	These methods are available:	The user name and password
	Console	• User name and password	are transmitted as plain text.
		• Selectable server port
		• Server Enable/Disable
	SNMP	These methods are available:	The NMS IP filters allow access
		• Community Name	from designated IP addresses.
			• 159.215.12.1 allows only the
		• NMS IP filters
		• Agent Enable/Disable	NMS with that IP address to
			have access.
		• Four access communities with
			• 159.215.12.255 allows
		read/write/disable capability
			access for any NMS on the
			159.215.12 segment.
			• 159.215.255.255 allows
			access for any NMS on the
			159.215 segment.
			• 159.255.255.255 allows
			access for any NMS on the
			159 segment.
			• 0.0.0.0 or 255.255.255.255
			allows access for any NMS.
	FTP Server	These methods are available:	Only the Administrator account
		• User name and password	has access.
		• Selectable server port
		• Server Enable/Disable
	Web Server	These methods are available:	In basic HTTP authentication
		• User name and password	mode, the user name and
			password are transmitted base-
		• Selectable server port
			64 encoded (with no
		• Server Enable/Disable	encryption). MD5 authentication
		• MD5 Authentication option	mode uses a user name and
			password phrase.

Web/SNMP Management SmartSlot Card User’s Guide 69