APC AP9606 manual System Menu, Web interface

System Menu

Option Settings

User Manager	Use this option to define the access values shared by the Control
	Console and the Web interface, and the authentication used to access
	the Web interface.
	Setting	Definition
	Auto Logout	Defines (in minutes) how long someone logged into the Control
		Console or Web interface can be inactive before that user is
		automatically logged out (3 minutes by default).
	Authentication	The Basic setting (default) causes the Web Interface to use
		standard HTTP 1.1 login (base64-encoded passwords); MD5
		causes the Web Interface to use an MD5-based authentication
		login.
		Note: Cookies must be enabled at a browser before it can be
		used with MD5 authentication.
	Administrator and Device Manager User
	User Name	Defines the case-sensitive name (maximum of 10 characters)
		used to log in (apc, by default, for Administrator, and device,
		by default, for Device Manager User).
	Password	Defines the case-sensitive password (maximum of 10
		characters) always used to log into the Control Console, but
		only used to log into the Web interface when Basic is selected
		for the Authentication setting (apc is the default for both
		Password settings).
	Authentication	Defines the case-sensitive, 15-to-32 character phrase used to
	Phrase	log into the Web interface when MD5 is the Authentication
		setting (admin user phrase, is the default for Administrator;
		device user phrase is the default for Device Manager User).
Identification	Use this option to define the System Name, Location, and Contact
	values used by the Management Card’s SNMP agent. The option’s

settings provide the values used for the MIB-II sysName, sysContact, and sysLocation Object Identifications (OIDs).

For more information about the MIB-II OIDs, see the PowerNet MIB Reference Guide provided on the APC Web/SNMP Management Card utility CD (./doc/mibguide.pdf).

Continued on next page

Web/SNMP Management SmartSlot Card User’s Guide 31