APC AP9606 manual Hhmmss format used by the Management Card, For file transfers, do the following

Page 32

System Menu

Option Settings continued

Date & Time

Use this option to change the Date (MM/DD/YYYY format) or Time

 

(HH:MM:SS format) used by the Management Card.

File Transfer

The Web interface identifies the IP addresses for the remote TFTP and

 

FTP servers, as well as the case-sensitive User Name and Password

 

settings used for FTP (apc, is the default for both). To use TFTP and FTP

 

for file transfers, do the following:

 

1. Define the file name in the Filename field, and click Apply.

 

2. Select TFTP or FTP from the Initiate File Transfer Via menu,

 

and click Apply.

 

 

The Control Console allows you to use TFTP, FTP, and XMODEM.

 

1. Use the Settings option to define the file name.

 

2. Select TFTP, FTP, or XMODEM from the menu and follow the on-

 

screen instructions.

 

For information about how to define the TFTP and FTP settings, see

 

Network Menu on page 26; for more information about file transfers,

 

see the Management Card Addendum provided on the APC Web/

 

SNMP Management Card utility CD (.\doc\Addendum.pdf).

Tools

Use this option’s drop-down menu to reboot the Management Card or to

 

reset some or all of its configuration settings to their original, default

 

values.

 

 

 

 

 

Menu Option

Definition

 

 

 

 

Reboot Card

Restarts the Management Card.

 

 

 

 

Reset Card to Defaults

Resets all configuration settings including the TCP/IP

 

 

settings, and enables BOOTP.

 

 

Note: The Management Card will not be able to

 

 

operate on the network until its TCP/IP settings

 

 

are redefined.

 

 

 

 

Reset Card to Defaults

Resets all configuration settings except the TCP/IP and

 

Except TCP/IP

BOOTP settings.

 

 

 

Continued on next page

Web/SNMP Management SmartSlot Card User’s Guide

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Title Thank You Contents Web/SNMP Management SmartSlot CardContents System Menu Events Menu Index American Power Conversion’s Web/SNMP Management SmartSlot Product DescriptionCard APC part number AP9606 is a web-based UPS Management Snmp Management SmartSlot Card, which is referred to asIntroduction Figure below identifies and describes the network management Through a Management CardInternal Management Features Password and User Name settings, see User Manager onFront Panel Watchdog Features Control Console IntroductionHow to Log See How to Recover from a Lost Password onControl Console Console, see Main Screen onHow to Recover from a Lost Password Main Screen Into the Control ConsoleUPS model and name field reports the status of the UPS Two fields identify when you logged in, by Date and TimeStatus field reports the Management Card status Control Console Menu Menus onWeb Interface You can use a supported Web browser to manage a UPS, anServer, Telnet, and Web on Netscape Navigator 3.0 or laterTion, see Email on Web InterfaceWeb interface, see Status Summary Page on Status Summary Menu Frame Device Manager Menus onUser-definable links on Being powered by the UPS AccessPages at the APC Web site Click on Links in the System menuNetwork Menu Option Settings Gateway plays, see The role of the Default GatewayResetting the network timer on page 13 for infor Network MenuDownload configuration files 0.0.0.0, by default Used to protect FTP accessSettings are 21 FTP, 23 Telnet, and 80 Web interface APC Web/SNMP Management Card utility CD ./docSetting Definition System Menu System Menu Web interfaceHhmmss format used by the Management Card For file transfers, do the followingDefine the file name in the Filename field, and click Apply Screen instructionsThree User Links, the URL address used by the APC logo, URL address used by the various Interactive Assistant linksDevice Manager Menus Environment Menu Options onDevice Manager Menus UPS Status OptionsStatus Field Definition Status for a Symmetra Power Array or Silcon DP300E seriesVoltage Load Power Output VoltageOutput FrequencyOutput Power PercentagePeak Output CurrentRemaining is shared by all UPS models Displayed above the UPS MenuUPS Diagnostics Options UPS Control Options Action DefinitionTest UPS Alarm options, see UPS Diagnostics Options on Table in Shutdown parameters onUPS Configuration Options Utility line settings on thisAlarm thresholds Symmetra Power Array on General settings onThreshold Definition Option to access the Return Battery Capacity setting Last Battery ReplacementAudible Alarm UPS NameModule Status Option Symmetra Power Array UPS PowerChute network shutdown Option For more information about PowerChute network shutdown, seeFollowing table describes the PowerChute network shutdown Snmp Management Card utility CDSee Probe settings below Environment Menu OptionsDescribed in How to Configure Individual Events Events MenuActions Web Interface only on Events MenuEvent Log FTP Or disabled for events with a specified severity level Event Actions Web Interface onlyEvents are recorded Assigned will still be loggedBy their specific IP addresses Recipients onEvent Recipients As described in Event Actions Web Interface only onTo which traps will be sent Snmp option in the Network menu See Email on the nextTing in Email recipients on Option. See Optimal Email Configuration Issues on Events Menu How to Configure Individual Events Example, to configure the UPS on battery event, as follows To log the event, and send traps to trap receivers 1Change the 2nd character to B Ents 1 and 2, change the 3rd character toManagement Card and Device Events Actions associated with an event, see Event Actions WebInterface only on System events in the table’s descriptionsEvents are generated by all UPS models Events Menu Events Menu Events Menu Environmental Monitoring SmartSlot Card events Security Features SecurityAuthentication SecurityInterface Security Access MethodsManagement Card TroubleshootingProblem Solution Troubleshooting Following table describes known Snmp problemsHow to Correct Communication Lost Problems Technical Support on page 74 for information about how toIf Problems Persist APC Worldwide Technical Support Persist on Warranty InformationProduct Information Product Information Life-Support PolicySpecifications Following table identifies the electrical specificationsFollowing table identifies the physical specifications Following table identifies the environmental specificationsAccept Changes option, 14 Access IndexIndex Device Manager menu optionsFTP Events, 23 24, 51, 53 Snmp UPS events, listed and described W. a p c c . c o m

AP9606 specifications

The APC AP9606 is a sophisticated environmental monitoring device designed to enhance the functionality and efficiency of data centers and critical IT environments. As part of APC’s suite of infrastructure solutions, the AP9606 is primarily aimed at monitoring conditions in rack-mounted and remote locations. By implementing advanced features and technologies, it ensures that environmental conditions remain optimal to prevent equipment failure and provide high availability for business operations.

One of the main features of the AP9606 is its ability to monitor and report various environmental factors including temperature, humidity, and other critical conditions. This real-time monitoring capability allows IT managers to react promptly to changing environmental variables which can significantly impact server and equipment performance. The device can be connected to a multitude of sensors, enabling users to customize their monitoring setups depending on specific requirements.

The AP9606 utilizes SNMP (Simple Network Management Protocol) for seamless integration with existing network management systems. This protocol allows easy communication between the device and other network elements, further enabling IT departments to consolidate and manage their infrastructure efficiently. Additionally, support for web-based interfaces gives users the flexibility to access real-time data from virtually anywhere, facilitating remote management capabilities which are crucial for businesses with multiple locations.

In terms of connectivity, the AP9606 is equipped with multiple ports, including an Ethernet port for network connection and optional serial ports for connecting with compatible devices. The inclusion of both wired and wireless options ensures that the device can adapt to various network environments, making it particularly versatile.

One of the standout characteristics of the APC AP9606 is its scalability. As businesses evolve, so do their monitoring needs. The AP9606 can be easily expanded with additional sensor modules, allowing businesses to grow their monitoring capabilities without needing entirely new systems. This flexibility makes it a cost-effective solution in the long run.

In summary, the APC AP9606 environmental monitoring device stands out due to its comprehensive monitoring features, robust connectivity options, and scalability. It is particularly well-suited for data centers and critical infrastructure environments where maintaining optimal conditions is essential. By investing in the AP9606, businesses can ensure they are proactively managing their IT assets, ultimately leading to improved operational performance and reduced risk of equipment failure.
Top Page Image Contents