Chapter 4 | Configuration Using the Console Interface |
Versions
The Versions screen displays the Boot Version, Software Version, Loader Version and the Hardware Version.
Versions
Boot Version This file runs when the Switch is turned on. It performs
Software Version This file contains the programming code that runs the Switch.
Hardware Version The current hardware setup of the Switch.
General System Information
The General System Information screen displays the System Description, System Up Time, System Mac Address, System Contact, System Name and System Location.
Select Edit and press the Enter key to make changes. When your changes are complete, press the Esc key to return to the Action menu. Select Save and press the Enter key to save your changes. To exit, select Quit and press the Enter key.
General Information
Management Settings
From the Management Settings screen, you can set Serial Port Session Configuration, Telnet Session Configuration, or Secure Telnet (SSH) Configuration.
Management Settings
Serial Port Configuration
On the Serial Port Configuration screen, the Switch’s baud rate is displayed.
Select Edit and press the Enter key to make changes. Toggle to the desired speed and when your changes are complete, press the Esc key to return to the Action menu. Select Save and press the Enter key to save your changes. To exit, select Quit and press the Enter key.
Serial Port Configuration
Telnet Configuration
On the Telnet Configuration screen, the
Select Edit and press the Enter key to make changes. When your changes are complete, press the Esc key to return to the Action menu. Select Save and press the Enter key to save your changes. To exit, select Quit and press the Enter key.
11 |