Chapter 5 | Advanced Configuration |
UDPPort DisplaystheUDPportusedtosendnotifications. The default is 162.
Filter Name Indicates if the SNMP filter for which the SNMP Notification filter is defined.
Timeout Indicates the amount of time (seconds) the device waits before resending informs. The default is 15 seconds.
Retries Indicates the amount of times the device resends an inform request. The default is 3 seconds.
The Add to List button adds the Notification Recipient configuration to the relevant table at the bottom of the screen.
Admin > User Authentication
The User Authentication screen is used to modify user passwords.
Admin > User Authentication
Authentication Type Defines the user authentication methods. Combinations of all the authentication methods can be selected. The possible field values are:
•• Local Authenticates the user at the device level. The device checks the user name and password for authentication.
•• RADIUS Authenticates the user at the RADIUS server.
•• TACACS+ Authenticates the user at the TACACS+ server.
•• None Assigns no authentication method to the authentication profile.
User Name Displays the user name.
Password Specifies the new password. The password is not displayed. As it entered an “*” corresponding to each character is displayed in the field. (Range:
Confirm Password Confirms the new password. The password entered into this field must be exactly the same as the password entered in the Password field.
The Add to List button adds the user configuration to the Local User’s Table.
Admin > Static Address
Admin > Static Address
A static address can be assigned to a specific interface on this switch. Static addresses are bound to the assigned interface and cannot be moved. When a static address is seen on another interface, the address will be ignored and will not be written to the address table.
Interface Displays the interface to which the entry refers:
•• Port The specific port number to which the forwarding database parameters refer.
•• LAG The specific LAG number to which the forwarding database parameters refer.
MAC Address Displays the MAC address to which the entry refers.
VLAN ID Displays the VLAN ID number to which the entry refers.
VLAN Name Displays the VLAN name to which the entry refers.
Status Displays how the entry was created. The possible field values are:
•• Permanent The MAC address is permanent.
52 |