Linksys Advanced Settings and Configuration Options for Switches

Page 61

Chapter 5

Advanced Configuration

Cable Length This is the approximate length of the cable. The Cable Length test can be performed only when the port is up and operating at 1Gbps.

Admin > Save Configuration

Admin > Save Configuration

Via TFTP

After you download a new image file, the device should be rebooted. If you are downloading a new boot image, please follow these steps:

1. Download the new boot code.

WARNING: While inputting the boot code, refrain from reseting the device.

2.Download the new software image.

3.Reset the device now.

Upgrade Select this option to upgrade the switch from a file located on a TFTP server.

•• TFTP Server The TFTP Server IP Address that contains the source file to upgrade from.

•• Source File Specifies the name of the upgrade file on the TFTP server.

Backup To back up the switch configuration via TFTP, enter the TFTP server address.

•• TFTP Server Specifies the TFTP Server IP Address to which the configuration file will be saved.

•• Destination File Specifies the name of the configuration file. The default is StartupCfg.cfg.

Via HTTP

This HTTP Firmware Upgrade screen is used for saving configuration information using your web browser.

Upgrade Select this option to upgrade the switch from a file on the local hard drive.

•• Source File Type in the name and path of the file or click Browse to locate the upgrade file.

Backup

Proceed The Proceed button is used to backup the configuration to the local hard drive.

Admin > Firmware Upgrade

Admin > FIrmware Upgrade

The Firmware Upgrade screen contains the following fields:

via TFTP Defines the upgrade through a TFTP Server.

via HTTP Allows you to upgrade the firmware using your Web browser.

Upgrade Defines the screen functionality as a Firmware upgrade.

Backup Defines the screen functionality as a Firmware backup.

TFTP Server IP Address Specifies the TFTP Server IP Address from which files are downloaded.

Source File Name Specifies the file to be downloaded.

Destination File name Specifies the destination file type to which to the file is downloaded. The possible field values are:

Software Image Downloads the image file. Boot Code Downloads the boot file.

8-Port 10/100 Ethernet Switch with Webview

55

Image 61

Contents Port 10/100 Ethernet Switch with Webview About This Guide About This GuideIcon Descriptions Online ResourcesTable of Contents Port 10/100 Ethernet Switch with Webview Iii Table of Contents Appendix F Regulatory Information Appendix B IntroductionAppendix G Contact Information Introduction Chapter IntroductionWelcome Product Overview Chapter Product OverviewSRW208 Front Panel SRW208G Front PanelSRW208P/SRW208MP Front Panel SRW208L Front PanelBack Panel Installation Chapter InstallationPositioning the Switch Placement OptionsRack-Mount Placement Wall-Mount Placement Hardware Installation Connecting to the Switch through a Telnet Session Chapter Configuration Using Console InterfaceSystem Configuration Menu Switch Main MenuManagement Settings SSH Configuration User & Password Settings IP Configuration Https Configuration Port Status Port ConfigurationHelp Advanced Configuration Chapter Advanced ConfigurationAccessing the Web-based Utility Setup SummaryIP Configuration Setup Network SettingsSystem Information PoE InformationPort Management Port Settings Setup TimePort Configuration Detail Link Aggregation Detail Port Management Link AggregationPort Management Lacp Port Management PoE Power SettingsVlan Management Create Vlan Vlan Management Port SettingsSingle Vlan Vlan RangeVlan Management Vlan to Ports Vlan Management Ports to VlanStatistics Rmon Statistics Vlan Management GvrpJoin Vlan Detail Log Table Statistics Rmon HistoryRmon History Statistics Rmon AlarmsAdd Event Statistics Rmon EventsStatistics 802.1x Statistics Statistics Port UtilizationACL IP based ACL Statistics Gvrp StatisticsACL MAC based ACL Security Radius Security ACL BindingSecurity TACACS+ Setting Timer Security 802.1x SettingsSecurity Ports Security Security Multiple Hosts Security Storm Control QoS CoS SettingsQoS QoS Dscp Settings QoS Queue SettingsCoS Default QoS BandwidthQoS Advanced Mode QoS Basic ModePolicy Name Out of Profile DscpNew Class Map Spanning Tree STP Status Spanning TreeNew Aggregate Policer Bridge Settings Global SettingSpanning Tree Global STP Spanning Tree Rstp Port Settings Spanning Tree STP Port SettingsEstablished by the device Spanning Tree Mstp PropertiesSpanning Tree Mstp Instance Settings Multicast Igmp Snooping Snmp Global Parameters Multicast Bridge MulticastSnmp Views Snmp Group Membership Snmp Group ProfileBase Table Snmp CommunitiesSnmp Notification Recipient Snmp Notification FilterAdvanced Table Admin Static Address Admin User AuthenticationAdmin Logging Admin Dynamic AddressQuery Admin Cable Test Admin Port MirroringAdmin Firmware Upgrade Admin Save ConfigurationBackup Via TftpAdmin Factory Defaults Admin RebootAdmin Server Logs Admin Flash Logs Admin Memory LogsGigabit Ethernet Appendix a About Gigabit Ethernet Fiber Optic CablingFiber Optic Cabling Appendix B Introduction Startup Menu ProceduresDownloading Using Xmodem Glossary Appendix C GlossaryGlossary Smtp Simple Mail Transfer Protocol The standard e Appendix C Specifications Appendix D SpecificationsQoS Specifications SRW208L SRW208MP Limits Bandwidth Intensive Video Traffic to Only Requestors Support 256 multicast groups Ethernet Obtaining Warranty Service Warranty InformationExclusions and Limitations Technical Support Warranty InformationRegulatory Information Safety NoticesFCC Statement Industry Canada StatementRegulatory Information Appendix F Norsk Norwegian Miljøinformasjon for kunder i EU Appendix F Contact Information Appendix G

Related manuals

Manual 3 pages 51.04 Kb

Manual 142 pages 37.07 Kb

Manual 3 pages 34.25 Kb