Chapter 4 | Configuration Using the Console Interface |
SSL Certificate Generation
Show Certificate
Use the Show Certificate screen to display the internal certificate.
SSL Certificate
Disable Active Management Profile
Selecting this option will prompt you to confirm that you want to disable the Active Management Profile.
IP Configuration
The IP Configuration screen displays these choices: the Switch’s IP Address Settings, HTTP, HTTPS Configuration and Network Configuration.
IP Configuration
IP Address Configuration
The IP Address Settings screen allows you to set the IP information for the Switch.
IP Address Configuration
IP Address The IP Address of the Switch is displayed. (The default IP address is 192.168.1.254.) Verify that the address you enter is correct and does not conflict with another device on the network.
Subnet Mask The subnet mask of the Switch is displayed.
Default Gateway The IP address of your network’s default gateway is displayed.
Management VLAN The VLAN ID number is displayed.
DHCP client The status of the DHCP client is displayed. If you want the Switch to be a DHCP client, then select ENABLE. If you want to assign an static IP address to the Switch, then enter the IP settings and select DISABLE.
Select Edit to make changes. When your changes are complete, press the Esc key to return to the Action menu, and select Save to save your changes.
HTTP
The HTTP screen displays the status and port number of the HTTP Server.
Select Edit and press the Enter key to make changes. When your changes are complete, press the Esc key to return to the Action menu. Select Save and press the Enter key to save your changes. To exit, select Quit and press the Enter key.
14 |