Linksys SRW208P, SRW208MP, SRW208L, SRW208G manual Snmp Views

Chapter 5 Advanced Configuration

SNMP > Global Parameters

Local Engine ID  Indicates the local device engine ID. The fieldvalueisahexadecimalstring.Eachbyteinhexadecimal character strings consists of two hexadecimal digits. Each byte can be separated by a period or a colon. The Engine ID must be defined before SNMPv3 is enabled. For stand- alone devices, select a default Engine ID that is comprised of Enterprise number and the default MAC address. For a stackable system configure the Engine ID, and verify that the Engine ID is unique for the administrative domain. This prevents two devices in a network from having the same Engine ID.

Use Default  Uses the device generated Engine ID. The default Engine ID is based on the device MAC address and is defined per standard as:

•• First 4 octets — first bit = 1, the rest is IANA Enterprise number.

•• Fifth octet — Set to 3 to indicate the MAC address that follows.

•• Last 6 octets — MAC address of the device.

SNMP Notifications  Indicates if the device can send SNMP notifications.

Authentication Notifications  Indicates if SNMP Authentication failure notification is enabled on the device.

SNMP > Views

SNMP > Views

SNMP Views provide access or block access to device features or feature aspects. For example, a view can be defined that states that SNMP Group A has Read Only (R/O) access to Multicast groups, while SNMP Group B has Read-Write (R/W) access to Multicast groups. Feature access is granted via the MIB name, or MIB Object ID.\

View Name  Displays the user-defined views. The options are as follows:

•• Default  Displays the default SNMP view for read and read/write views.

•• DefaultSuper  Displays the default SNMP view for administrator views.

Subtree IDTree  Indicates the device feature OID included or excluded in the selected SNMP view. The options to select the Subtree are as follows:

•• Select from List  Select the Subtree from the list provided.

•• Insert  Enables a Subtree not included in the Select from List field to be entered.

View Type  Indicates if the defined OID branch will be included or excluded in the selected SNMP view.

The Add to List button adds the Views configuration to the Views Table at the bottom of the screen.

8-Port 10/100 Ethernet Switch with Webview 48