Linksys SRW224G4P manual Setup Summary, Device Information

Page 18

Chapter 5

Chapter 5: Configuring the Switch

Open your web browser and enter http://192.168.1.254 into the address field.. Press the Enter key and the Password screen will appear..

Address Bar

NOTE: The default IP address is 192.168.1.254.. If the IP address has been changed using DHCP or via the console interface, enter the assigned IP address instead of the default..

The first time you open the web‑based utility, enter admin (the default username) in the username field and leave the password blank.. Click the OK button.. You can set a password later from the Admin tab’s User Accounts screen..

Login Screen

Setup

The first screen displays the Summary screen on the Setup tab.. There are 10 tabs across the top of the screen: Setup, Port management, VLAN Management, Statistics, ACL, Security, QoS, Spanning Tree, Multicast, and a More tab.. Click the More tab to access the SNMP, Admin and Logout tabs.. Each tab contains screens that will help you configure and manage the Switch..

Configuring the Switch

Setup > Summary

The Setup > Summary screen displays a summary of Switch information.. The settings cannot be modified from the Setup > Summary screen.. Many of the settings can be modified from the Setup > Network Settings screen..

Setup > Summary

Device Information

System Name  Displays the name for the Switch, if one has been entered..

IP Address  The IP address assigned to the Switch is displayed.. (The default IP address is 192.168.1.254)

Subnet Mask  The Subnet Mask assigned to the Switch is displayed (The default is 255.255.255.0)..

DNS Servers  The IP address of your ISP’s server, which translates the names of websites into IP addresses..

Default Gateway  IP address of the gateway router between this device and management stations that exist on other network segments.. (Default: 0.0.0.0)

Address Mode  Specifies whether IP functionality is enabled via manual configuration (Static), Dynamic Host Configuration Protocol (DHCP), or Boot Protocol (BOOTP).. If DHCP/BOOTP is enabled, IP will not function until a reply has been received from the server.. Requests will be broadcast periodically by the Switch for an IP address.. (DHCP/BOOTP values can include the IP address, subnet mask, and default gateway..)

Base MAC Address  The MAC address of the Switch is displayed..

24-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet

14

Page 17 Page 19
Image 18
Page 17 Page 19
Contents User Guide Table of Contents ACL Appendix E Contact Information Appendix a About Gigabit Ethernet and Fiber Optic CablingOnline Resources About This GuideIcon Descriptions Copyright and TrademarksChapter Chapter IntroductionChapter Product Overview Front PanelBack Panel Side PanelPre-Installation Considerations Placement OptionsOverview Desktop Placement Hardware InstallationUplinking the Switch Rack-Mount PlacementChapter Configuration Using Console Interface Configuring the HyperTerminal ApplicationSystem Configuration Menu LoginSwitch Main Menu System ConfigurationManagement Settings User & Password SettingsIP Configuration IP Address SettingsRestore System Default Settings Reboot SystemFile Management Port Status Port ConfigurationPoE Configuration Back to Main MenuPort PoE Status System PoE ConfigurationPort PoE Configuration LogoutSetup Setup SummaryDevice Information PoE Information Setup Network SettingsSystem Information IdentificationSetup Time Set TimePort Management Port Settings Edit Port SettingsPort Management Port Management Link Aggregation Port Broadcast ControlPort Setting Port Management PoE Power SettingsGlobal Setting Port Management LacpVlan Management Create Vlan Vlan Management Port SettingsVlan Management Create VlanVlan Management Ports to Vlan Vlan Management Vlan to PortsStatistics Statistics Rmon StatisticsStatistics Rmon History Statistics Rmon Alarms Statistics Rmon EventsStatistics Port Utilization Statistics 802.1x StatisticsACL IP based ACL ACL MAC based ACLSecurity Security Authentication ServersRadius Server Setting Security ACL BindingSecurity 802.1x Settings Tacacs Server SettingSecurity Ports Security Security Https Settings Security Management ACLSecurity SSH Settings Security SSH Host-Key SettingsQoS CoS Settings QoSCoS to Queue Queue Settings QoS Queue SettingsQoS Dscp Settings Port to CoSQoS DiffServ Settings Class MapPolicy Map Spanning Tree QoS DiffServ Port BindingQoS Bandwidth Spanning Tree STP Status Spanning Tree Global STPSpanning Tree STP Port Settings Spanning Tree STP Port Settings STP Port Setting Detail Spanning Tree Rstp Port Settings Spanning Tree Mstp Instance Settings Spanning Tree Mstp PropertiesSpanning Tree Mstp Interface Settings Multicast Multicast Global Settings Multicast Static Member PortsMulticast Static Router Ports Multicast Member Ports QueryMulticast Router Ports Query Snmp Global Parameters Snmp Views Snmp Group ProfileSnmp Communities User AuthenticationSnmp Group Membership Data PrivacySnmp Notification Recipient AdminAdmin User Authentication SNMPv1,2Address Aging Admin Forwarding DatabaseStatic Address Setting Dynamic Address QueryAdmin Log System LoggingSyslog Admin Port Mirroring Smtp SettingAdmin Cable Test Admin PingAdmin Save Configuration Admin Jumbo Frame Admin Firmware UpgradeAdmin Http Upgrade Admin Reboot Admin Factory DefaultAppendix a About Gigabit Ethernet Fiber Optic Cabling Gigabit EthernetFiber Optic Cabling Appendix B Appendix B GlossaryGlossary Smtp Simple Mail Transfer Protocol The standard e Appendix B Appendix C Specifications Appendix CSpecifications Appendix D Warranty and Regulatory Information Limited WarrantyIndustry Canada Canada Safety NoticesFCC Statement IC StatementDansk Danish Miljøinformation for kunder i EU La Directiva 2002/96/CE de la UE exige que los equipos que Norsk Norwegian Miljøinformasjon for kunder i EU WEB For additional information, please visit Appendix E
Top Page Image Contents