Linksys SRW224G4P manual Admin Cable Test, Admin Ping, Admin Save Configuration

Page 56

Chapter 5

Configuring the Switch

Admin > Cable Test

Admin > Cable Test

To test the connection quality of an attached cable, click on the Test button for the port..

NOTE: The cable needs to be connected at both ends, otherwise the test will fail..

The cable test results for each port are displayed in the table..

Admin > Ping

You can use a ping to see if another site on the network can be reached.. Ping sends ICMP echo request packets to another node on the network..

Admin > Ping

Enter the IP address or host name of the device you want to ping, then click Go.. The ping results are displayed in the Ping Status text box..

The following are some commonly displayed results of a ping:

•Normal response The normal response occurs in one to ten seconds, depending on network traffic..

•Destination does not respond If the host does not respond, a “timeout” appears in ten seconds..

• Destination unreachable The gateway for

this destination indicates that the destination is unreachable..

•Network or host unreachable The gateway found no corresponding entry in the route table..

Admin > Save Configuration

Admin > Save Configuration

Downloads or uploads Switch configuration files from a TFTP server.. The Switch allows the start-up configuration to be saved or restored from a TFTP server.. You must specify Upgrade to download a new configuration file or Backup to save a configuration file to the server..

Select the Upgrade or Backup option.. Enter the IP address of the TFTP server, specify the name of the configuration file on the server, and then click Save Settings..

24-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet

52

Image 56

Contents User Guide Table of Contents ACL Appendix E Contact Information Appendix a About Gigabit Ethernet and Fiber Optic CablingAbout This Guide Icon DescriptionsOnline Resources Copyright and TrademarksChapter Chapter IntroductionChapter Product Overview Front PanelBack Panel Side PanelOverview Pre-Installation ConsiderationsPlacement Options Hardware Installation Uplinking the SwitchDesktop Placement Rack-Mount PlacementChapter Configuration Using Console Interface Configuring the HyperTerminal ApplicationLogin Switch Main MenuSystem Configuration Menu System ConfigurationManagement Settings User & Password SettingsIP Configuration IP Address SettingsFile Management Restore System Default SettingsReboot System Port Configuration PoE ConfigurationPort Status Back to Main MenuSystem PoE Configuration Port PoE ConfigurationPort PoE Status LogoutDevice Information SetupSetup Summary Setup Network Settings System InformationPoE Information IdentificationSetup Time Set TimePort Management Port Management Port SettingsEdit Port Settings Port Management Link Aggregation Port Broadcast ControlPort Management PoE Power Settings Global SettingPort Setting Port Management LacpVlan Management Port Settings Vlan ManagementVlan Management Create Vlan Create VlanVlan Management Ports to Vlan Vlan Management Vlan to PortsStatistics Rmon History StatisticsStatistics Rmon Statistics Statistics Rmon Alarms Statistics Rmon EventsStatistics Port Utilization Statistics 802.1x StatisticsACL IP based ACL ACL MAC based ACLSecurity Authentication Servers Radius Server SettingSecurity Security ACL BindingSecurity 802.1x Settings Tacacs Server SettingSecurity Ports Security Security Https Settings Security Management ACLSecurity SSH Settings Security SSH Host-Key SettingsCoS to Queue QoS CoS SettingsQoS QoS Queue Settings QoS Dscp SettingsQueue Settings Port to CoSQoS DiffServ Settings Class MapPolicy Map QoS Bandwidth Spanning TreeQoS DiffServ Port Binding Spanning Tree STP Status Spanning Tree Global STPSpanning Tree STP Port Settings Spanning Tree STP Port Settings STP Port Setting Detail Spanning Tree Rstp Port Settings Spanning Tree Mstp Instance Settings Spanning Tree Mstp PropertiesSpanning Tree Mstp Interface Settings Multicast Multicast Global Settings Multicast Static Member PortsMulticast Router Ports Query Multicast Static Router PortsMulticast Member Ports Query Snmp Global Parameters Snmp Views Snmp Group ProfileUser Authentication Snmp Group MembershipSnmp Communities Data PrivacyAdmin Admin User AuthenticationSnmp Notification Recipient SNMPv1,2Admin Forwarding Database Static Address SettingAddress Aging Dynamic Address QuerySyslog Admin LogSystem Logging Admin Port Mirroring Smtp SettingAdmin Save Configuration Admin Cable TestAdmin Ping Admin Http Upgrade Admin Jumbo FrameAdmin Firmware Upgrade Admin Reboot Admin Factory DefaultFiber Optic Cabling Appendix a About Gigabit Ethernet Fiber Optic CablingGigabit Ethernet Appendix B Appendix B GlossaryGlossary Smtp Simple Mail Transfer Protocol The standard e Appendix B Appendix C Specifications Appendix CSpecifications Appendix D Warranty and Regulatory Information Limited WarrantySafety Notices FCC StatementIndustry Canada Canada IC StatementDansk Danish Miljøinformation for kunder i EU La Directiva 2002/96/CE de la UE exige que los equipos que Norsk Norwegian Miljøinformasjon for kunder i EU WEB For additional information, please visit Appendix E