Linksys SRW224G4P Snmp Group Membership, Snmp Communities, User Authentication, Data Privacy

Page 51

Chapter 5

Configuring the Switch

SNMP > Group Membership

SNMP > Group Membership

User Name  The name of the user connecting to the SNMP agent.. (Range: 1-32 characters)

Local  Click the Local option to use the local SNMP agent..

Remote  The Internet address of the remote device where the user resides.. Click the Remote option and select an IP address from the drop-down list..

Group Name  The name of the SNMP group to which the user is assigned.. (Range: 1-32 characters)

Security Model  The user security model; SNMP v1, v2c or v3.. (Default: v1)

Security Level  The security level used for the user:

•noAuthNoPriv  There is no authentication or encryption used in SNMP communications.. (This is the default for SNMPv3..)

•AuthNoPriv  SNMP communications use authentication, but the data is not encrypted (only available for the SNMPv3 security model)..

•AuthPriv  SNMP communications use both authentication and encryption (only available for the SNMPv3 security model)..

User Authentication

Authentication Protocol  The method used for user authentication.. (Options: MD5, SHA; Default: MD5)

Authentication Password  A minimum of eight plain text characters is required..

Data Privacy

Privacy Protocol  The encryption algorithm use for data privacy; only 56-bit DES is currently available..

Privacy Password  A minimum of eight plain text characters is required..

SNMP > Communities

You may configure up to five community strings authorized for management access by clients using SNMP v1 and v2c.. All community strings used for IP Trap Managers should be listed in this table.. For security reasons, you should consider removing the default strings..

SNMP > Communities

Community String  A community string that acts like a password and permits access to the SNMP protocol..

Default strings: “public” (read-only access), “private” (read/ write access)

Range: 1-32 characters, case sensitive

•Access Mode  Specifies the access rights for the community string:

•Read-Only Authorized management stations are only able to retrieve MIB objects..

•Read/Write  Authorized management stations are able to both retrieve and modify MIB objects..

Enter a name and select the access rights from the Access Mode drop-down menu.. These strings act as passwords, they are case-sensitive and can be up to 32 characters long.. Strings can be specified for read-only or read/write access.. Once this is entered, click Add..

24-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet

47

Page 50 Page 52
Image 51
Page 50 Page 52
Contents User Guide Table of Contents ACL Appendix a About Gigabit Ethernet and Fiber Optic Cabling Appendix E Contact InformationCopyright and Trademarks About This GuideIcon Descriptions Online ResourcesChapter Introduction ChapterFront Panel Chapter Product OverviewSide Panel Back PanelPre-Installation Considerations Placement OptionsOverview Rack-Mount Placement Hardware InstallationUplinking the Switch Desktop PlacementConfiguring the HyperTerminal Application Chapter Configuration Using Console InterfaceSystem Configuration LoginSwitch Main Menu System Configuration MenuUser & Password Settings Management SettingsIP Address Settings IP ConfigurationRestore System Default Settings Reboot SystemFile Management Back to Main Menu Port ConfigurationPoE Configuration Port StatusLogout System PoE ConfigurationPort PoE Configuration Port PoE StatusSetup Setup SummaryDevice Information Identification Setup Network SettingsSystem Information PoE InformationSet Time Setup TimePort Management Port Settings Edit Port SettingsPort Management Port Broadcast Control Port Management Link AggregationPort Management Lacp Port Management PoE Power SettingsGlobal Setting Port SettingCreate Vlan Vlan Management Port SettingsVlan Management Vlan Management Create VlanVlan Management Vlan to Ports Vlan Management Ports to VlanStatistics Statistics Rmon StatisticsStatistics Rmon History Statistics Rmon Events Statistics Rmon AlarmsStatistics 802.1x Statistics Statistics Port UtilizationACL MAC based ACL ACL IP based ACLSecurity ACL Binding Security Authentication ServersRadius Server Setting SecurityTacacs Server Setting Security 802.1x SettingsSecurity Ports Security Security Management ACL Security Https SettingsSecurity SSH Host-Key Settings Security SSH SettingsQoS CoS Settings QoSCoS to Queue Port to CoS QoS Queue SettingsQoS Dscp Settings Queue SettingsClass Map QoS DiffServ SettingsPolicy Map Spanning Tree QoS DiffServ Port BindingQoS Bandwidth Spanning Tree Global STP Spanning Tree STP StatusSpanning Tree STP Port Settings Spanning Tree STP Port Settings STP Port Setting Detail Spanning Tree Rstp Port Settings Spanning Tree Mstp Properties Spanning Tree Mstp Instance SettingsSpanning Tree Mstp Interface Settings Multicast Multicast Static Member Ports Multicast Global SettingsMulticast Static Router Ports Multicast Member Ports QueryMulticast Router Ports Query Snmp Global Parameters Snmp Group Profile Snmp ViewsData Privacy User AuthenticationSnmp Group Membership Snmp CommunitiesSNMPv1,2 AdminAdmin User Authentication Snmp Notification RecipientDynamic Address Query Admin Forwarding DatabaseStatic Address Setting Address AgingAdmin Log System LoggingSyslog Smtp Setting Admin Port MirroringAdmin Cable Test Admin PingAdmin Save Configuration Admin Jumbo Frame Admin Firmware UpgradeAdmin Http Upgrade Admin Factory Default Admin RebootAppendix a About Gigabit Ethernet Fiber Optic Cabling Gigabit EthernetFiber Optic Cabling Appendix B Glossary Appendix BGlossary Smtp Simple Mail Transfer Protocol The standard e Appendix B Appendix C Appendix C SpecificationsSpecifications Limited Warranty Appendix D Warranty and Regulatory InformationIC Statement Safety NoticesFCC Statement Industry Canada CanadaDansk Danish Miljøinformation for kunder i EU La Directiva 2002/96/CE de la UE exige que los equipos que Norsk Norwegian Miljøinformasjon for kunder i EU WEB For additional information, please visit Appendix E
Top Page Image Contents