Linksys SRW224G4P manual ACL IP based ACL, ACL MAC based ACL

Page 29

Chapter 5

Configuring the Switch

ACL > IP based ACL

ACL > IP based ACL

Target Select the New ACL Name option and enter an ACL name in the text field provided (with up to 16 characters).. To add rules to an existing ACL, select the ACL Name option and select an ACL from the drop-down menu..

Action An ACL can contain any combination of permit or deny rules..

Protocol Specifies the protocol type to match as TCP, UDP or Others, where others indicates a specific protocol number (0-255).. (Options: TCP, UDP, Others; Default: ANY)

TCP Flags Specify the TCP flag bits in byte 14 of the TCP header by selecting Set or Unset from the drop-down menus.. The following TCP flags may be specified:

•Urg Urgent pointer

•Rst Reset

•Ack Acknowledgement

•Syn Synchronize

•Psh Push

•Fin Finish

Source/Destination Port (0-65535) Source/destination port number for the specified protocol type.. (Range: 0- 65535)

Use the Source/Destination IP Address option to apply the ACL rule to an IP address or select the Any option to apply the rule to all IP addresses..

Source/Destination IP Address Enter a source or destination IP address..

Wildcard Mask Enter the Wildcard Mask for the Source/ Destination IP addresses..

Match CoS Packet priority settings based on the following criteria:

•DSCP DSCP priority level.. (Range: 0-63)

•Precedence IP precedence level.. (Range: 0-7) Then click the Add to List Button

To remove an ACL rule, select an ACL rule from the table and click Remove..

When all rules are removed from the ACL the ACL is also removed..

ACL > MAC based ACL

ACL > MAC based ACL

Target Select the New ACL Name option and enter an ACL name in the text field provided (with up to 16 characters).. To add rules to an existing ACL, select the ACL Name option and select an ACL from the drop-down menu..

Action An ACL can contain any combination of permit or deny rules..

Use the Source/Destination MAC Address option to apply the ACL rule to a MAC address or select the Any option to apply the rule to all MAC addresses..

Source/Destination MAC Address Specify a MAC address (for example, 11-22-33-44-55-66)..

Source/Destination Wildcard Mask Hexadecimal mask for source or destination MAC address..

VLAN ID Specify a VLAN ID.. (Range: 1-4094)

24-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet

25

Image 29

Contents User Guide Table of Contents ACL Appendix a About Gigabit Ethernet and Fiber Optic Cabling Appendix E Contact InformationIcon Descriptions About This GuideOnline Resources Copyright and TrademarksChapter Introduction ChapterFront Panel Chapter Product OverviewSide Panel Back PanelOverview Pre-Installation ConsiderationsPlacement Options Uplinking the Switch Hardware InstallationDesktop Placement Rack-Mount PlacementConfiguring the HyperTerminal Application Chapter Configuration Using Console InterfaceSwitch Main Menu LoginSystem Configuration Menu System ConfigurationUser & Password Settings Management SettingsIP Address Settings IP ConfigurationFile Management Restore System Default SettingsReboot System PoE Configuration Port ConfigurationPort Status Back to Main MenuPort PoE Configuration System PoE ConfigurationPort PoE Status LogoutDevice Information SetupSetup Summary System Information Setup Network SettingsPoE Information IdentificationSet Time Setup TimePort Management Port Management Port SettingsEdit Port Settings Port Broadcast Control Port Management Link AggregationGlobal Setting Port Management PoE Power SettingsPort Setting Port Management LacpVlan Management Vlan Management Port SettingsVlan Management Create Vlan Create VlanVlan Management Vlan to Ports Vlan Management Ports to VlanStatistics Rmon History StatisticsStatistics Rmon Statistics Statistics Rmon Events Statistics Rmon AlarmsStatistics 802.1x Statistics Statistics Port UtilizationACL MAC based ACL ACL IP based ACLRadius Server Setting Security Authentication ServersSecurity Security ACL BindingTacacs Server Setting Security 802.1x SettingsSecurity Ports Security Security Management ACL Security Https SettingsSecurity SSH Host-Key Settings Security SSH SettingsCoS to Queue QoS CoS SettingsQoS QoS Dscp Settings QoS Queue SettingsQueue Settings Port to CoSClass Map QoS DiffServ SettingsPolicy Map QoS Bandwidth Spanning TreeQoS DiffServ Port Binding Spanning Tree Global STP Spanning Tree STP StatusSpanning Tree STP Port Settings Spanning Tree STP Port Settings STP Port Setting Detail Spanning Tree Rstp Port Settings Spanning Tree Mstp Properties Spanning Tree Mstp Instance SettingsSpanning Tree Mstp Interface Settings Multicast Multicast Static Member Ports Multicast Global SettingsMulticast Router Ports Query Multicast Static Router PortsMulticast Member Ports Query Snmp Global Parameters Snmp Group Profile Snmp ViewsSnmp Group Membership User AuthenticationSnmp Communities Data PrivacyAdmin User Authentication AdminSnmp Notification Recipient SNMPv1,2Static Address Setting Admin Forwarding DatabaseAddress Aging Dynamic Address QuerySyslog Admin LogSystem Logging Smtp Setting Admin Port MirroringAdmin Save Configuration Admin Cable TestAdmin Ping Admin Http Upgrade Admin Jumbo FrameAdmin Firmware Upgrade Admin Factory Default Admin RebootFiber Optic Cabling Appendix a About Gigabit Ethernet Fiber Optic CablingGigabit Ethernet Appendix B Glossary Appendix BGlossary Smtp Simple Mail Transfer Protocol The standard e Appendix B Appendix C Appendix C SpecificationsSpecifications Limited Warranty Appendix D Warranty and Regulatory InformationFCC Statement Safety NoticesIndustry Canada Canada IC StatementDansk Danish Miljøinformation for kunder i EU La Directiva 2002/96/CE de la UE exige que los equipos que Norsk Norwegian Miljøinformasjon for kunder i EU WEB For additional information, please visit Appendix E