Advantech EKI-7657C Tftp Commands Set, SystemLog, Smtp and Event, SysLog,SMTP,Event Commands Set

		change the radius server port
8021x system accountport		Use the 802.1x system account	switch(config)# 8021x system accountport 1813
[port ID]	G	port global configuration command
		to change the accounting port
8021x system sharedkey		Use the 802.1x system share key	switch(config)# 8021x system sharedkey 123456
[ID]	G	global configuration command to
		change the shared key value.
8021x system nasid	G	Use the 802.1x system nasid	switch(config)# 8021x system nasid test1
[words]		global configuration command to
		change the NAS ID
8021x misc quietperiod		Use the 802.1x misc quiet period	switch(config)# 8021x misc quietperiod 10
[sec.]	G	global configuration command to
		specify the quiet period value of
		the switch.
8021x misc txperiod		Use the 802.1x misc TX period	switch(config)# 8021x misc txperiod 5
[sec.]	G	global configuration command to
		set the TX period.
8021x misc supptimeout [sec.]		Use the 802.1x misc supp timeout	switch(config)# 8021x misc supptimeout 20
	G	global configuration command to
		set the supplicant timeout.
8021x misc servertimeout [sec.]		Use the 802.1x misc server	switch(config)#8021x misc servertimeout 20
	G	timeout global configuration
		command to set the server
		timeout.
8021x misc maxrequest [number]		Use the 802.1x misc max request	switch(config)# 8021x misc maxrequest 3
	G	global configuration command to
		set the MAX requests.
8021x misc reauthperiod [sec.]	G	Use the 802.1x misc reauth period	switch(config)# 8021x misc reauthperiod 3000
		global configuration command to
		set the reauth period.
8021x portstate		Use the 802.1x port state interface	switch(config)#interface fastethernet 3
[disable reject accept authorize]	I	configuration command to set the	switch(config-if)#8021x portstate accept
		state of the selected port.
show 8021x	E	Displays a summary of the 802.1x	switch>show 8021x
		properties and also the port sates.
no 8021x	G	Disable 802.1x function	switch(config)#no 8021x

3.1.14TFTP Commands Set

Table 3.14: TFTP Commands Set

Netstar Commands	Level	Description	Defaults Example
backup flash:backup_cfg		Save configuration to TFTP and need	switch(config)#backup flash:backup_cfg
	G	to specify the IP of TFTP server and
		the file name of image.
restore flash:restore_cfg		Get configuration from TFTP server	switch(config)#restore flash:restore_cfg
	G	and need to specify the IP of TFTP
		server and the file name of image.
upgrade flash:upgrade_fw		Upgrade firmware by TFTP and need	switch(config)#upgrade flash:upgrade_fw
	G	to specify the IP of TFTP server and
		the file name of image.

3.1.15SystemLog, SMTP and Event

Table 3.15: SysLog,SMTP,Event Commands Set

Netstar Commands	Level	Description	Example
systemlog ip	G	Set System log server IP address.	switch(config)# systemlog ip 192.168.1.100
[IP address]

EKI-7657C _Manual_ed1 36