Data Formatting Errors
Errors 571 to 618 are data formatting errors. This type of error happens when a field prints incorrectly. Your System Administrator can correct the format, batch, or graphic packet and send the print job again. For errors 571 to 614, the printer will still print, but the data may be incomplete, missing, or wrong.
Error Description/Action
571UPC or EAN bar code data length in the batch doesn’t fit the format.
572Batch data doesn’t fit the format, the field contains blanks, or data mismatch.
573Batch data in price field doesn’t fit the format or the field contains blanks.
574Batch data in check digit scheme doesn’t fir the format, or the field contains blanks.
575The graphic included in your format could not be found.
600Imaging error because the batch was refused.
601An error occurred while the batch was imaging.
602The batch was not found during imaging.
611Font, bar code, or density in the batch doesn’t fit the format.
612Batch data is missing or doesn’t match the format.
613Reference point off tag.
614Portion of field off tag.
615Bar code width is greater than 16 inches, or keywords of PDF417 bar code exceed 928.
616A bad dot falls on a bar code that cannot be shifted. Call Service or replace the printhead.
618 | Magnification must be 1 to 7. |
620Font and printhead density mismatch. Check the font or verify the correct printhead (203 dpi or 300 dpi) is installed.
48 ∙ Troubleshooting - 5 | Paxar Systems Group Paxar 9840CL Printer |