Paxar 9406 manual Wire Clip Backing Paper Take-up Reel

Page 16

9406 Equipment Manual

b.Pull the wire clip off the backing paper take-up reel as shown.

Wire Clip

Backing Paper

Take-up Reel

c.Slide the backing paper off the wire clip.

d.Replace the wire clip on the backing paper take-up reel.

6.Manually rewind the remaining supplies back onto the supply platter and remove the roll.

1-10

Image 16

Contents Equipment Manual Canadian D.O.C. Warning System Administrators Guide Messages Manual PrefaceEquipment Manual Table of Contents Equipment Manual Supplies Loading or Changing Supplies Move the printhead lever as shown to open the printhead Exit Ribbon Chute Supply Door Guide Edge Exit Chute Door Supply Edge Guide Sensor Remove the wire clip from the backing paper take-up reel Printhead Lever Backing Paper Take-Up Reel Removing Supplies Tear Backing Paper Here Wire Clip Backing Paper Take-up Reel Supplies Supply Loading Diagram Setting the Supply Type Option Supply Type Ribbon Loading or Changing the RibbonPull the exit chute door open Ribbon Supply Guide Open the printhead latch as shown Printhead Rollers Ribbon Take-up Reel Core Ribbon Take-up Reel Ribbon Supply Guide Removing the Ribbon Move the printhead lever to open the printhead Ribbon Delivery Reel Take-up Printhead Latch Setting the Ribbon Option Press Q to exit to the Main Menu Cleaning the Printhead and Platen Roller Turn off the power and unplug the cord before proceedingPrinthead Latch Lever Platen Roller Printhead Equipment Manual Replacing the Fuse Equipment Manual Troubleshooting Problem Corrective ActionProblem Corrective Action Specifications PrinterSupplies Page U.S.A Canada