Paxar 9406 manual Ribbon Delivery Reel Take-up Printhead Latch

Page 30

9406 Equipment Manual

7.Lift both ribbon reels by the wire clip and move both ends of the ribbon away from the printer.

Ribbon

Delivery

Reel

Ribbon

Take-up

Reel

Printhead

Latch

8.Remove wire clips from the ribbon, and put them back on the reels.

9.Load the supplies you want to use. See "Loading or Changing Supplies" for more information.

10.Close the printhead latch.

11.Close the printhead lever.

12.Close the exit chute door.

13.Close the printer cover.

14.Turn on the power.

2-10

Image 30
Contents Equipment Manual Canadian D.O.C. Warning System Administrators Guide Messages Manual PrefaceEquipment Manual Table of Contents Equipment Manual Supplies Loading or Changing Supplies Move the printhead lever as shown to open the printhead Exit Ribbon Chute Supply Door Guide Edge Exit Chute Door Supply Edge Guide Sensor Remove the wire clip from the backing paper take-up reel Printhead Lever Backing Paper Take-Up Reel Removing Supplies Tear Backing Paper Here Wire Clip Backing Paper Take-up Reel Supplies Supply Loading Diagram Setting the Supply Type Option Supply Type Ribbon Loading or Changing the RibbonPull the exit chute door open Ribbon Supply Guide Open the printhead latch as shown Printhead Rollers Ribbon Take-up Reel Core Ribbon Take-up Reel Ribbon Supply Guide Removing the Ribbon Move the printhead lever to open the printhead Ribbon Delivery Reel Take-up Printhead Latch Setting the Ribbon Option Press Q to exit to the Main Menu Cleaning the Printhead and Platen Roller Turn off the power and unplug the cord before proceedingPrinthead Latch Lever Platen Roller Printhead Equipment Manual Replacing the Fuse Equipment Manual Troubleshooting Problem Corrective ActionProblem Corrective Action Specifications PrinterSupplies Page U.S.A Canada