Paxar 9406 manual Printhead Rollers Ribbon Take-up Reel Core

Page 25

2. The Ribbon

10.Guide the ribbon around the first two rollers, down between the printhead and the front of the printer and around to the ribbon take-up reel as shown.

Printhead

Rollers

Ribbon

Take-up

Reel

Ribbon

Core

11. Place the ribbon core over the wire clip on the ribbon
take-up reel. If you are loading a new ribbon, it is the	The
empty core.	The
	Ribbon

2-5

Image 25

Contents Equipment Manual Canadian D.O.C. Warning Preface System Administrators Guide Messages ManualEquipment Manual Table of Contents Equipment Manual Supplies Loading or Changing Supplies Move the printhead lever as shown to open the printhead Exit Ribbon Chute Supply Door Guide Edge Exit Chute Door Supply Edge Guide Sensor Remove the wire clip from the backing paper take-up reel Printhead Lever Backing Paper Take-Up Reel Removing Supplies Tear Backing Paper Here Wire Clip Backing Paper Take-up Reel Supplies Supply Loading Diagram Setting the Supply Type Option Supply Type Loading or Changing the Ribbon RibbonPull the exit chute door open Ribbon Supply Guide Open the printhead latch as shown Printhead Rollers Ribbon Take-up Reel Core Ribbon Take-up Reel Ribbon Supply Guide Removing the Ribbon Move the printhead lever to open the printhead Ribbon Delivery Reel Take-up Printhead Latch Setting the Ribbon Option Press Q to exit to the Main Menu Turn off the power and unplug the cord before proceeding Cleaning the Printhead and Platen RollerPrinthead Latch Lever Platen Roller Printhead Equipment Manual Replacing the Fuse Equipment Manual Problem Corrective Action TroubleshootingProblem Corrective Action Printer SpecificationsSupplies Page U.S.A Canada