Paxar 9406 manual Setting the Supply Type Option

Page 19

1. Supplies

Setting the Supply Type Option

You can use indexed or non-indexed supplies with the 9406 printer.

Indexed supplies have marks to indicate the specific length of each tag or label. Supplies with an aperture or black mark are indexed supplies.

Non-indexed supplies have no marks to indicate the specific length of the tag or label.

The default setting for Supply Type is Indexed. To change the setting, follow the steps below.

1.From the Main Menu, press R or L until you see

MAIN MENU

Setup

2. Press E . You will see

SETUP

Supply

3.Press E . You will see the first supply option.

SUPPLY

Ribbon

4. Press R until you see

SUPPLY

Supply Type

Supplies

1-13

Image 19

Contents Equipment Manual Canadian D.O.C. Warning Preface System Administrators Guide Messages ManualEquipment Manual Table of Contents Equipment Manual Supplies Loading or Changing Supplies Move the printhead lever as shown to open the printhead Exit Ribbon Chute Supply Door Guide Edge Exit Chute Door Supply Edge Guide Sensor Remove the wire clip from the backing paper take-up reel Printhead Lever Backing Paper Take-Up Reel Removing Supplies Tear Backing Paper Here Wire Clip Backing Paper Take-up Reel Supplies Supply Loading Diagram Setting the Supply Type Option Supply Type Loading or Changing the Ribbon RibbonPull the exit chute door open Ribbon Supply Guide Open the printhead latch as shown Printhead Rollers Ribbon Take-up Reel Core Ribbon Take-up Reel Ribbon Supply Guide Removing the Ribbon Move the printhead lever to open the printhead Ribbon Delivery Reel Take-up Printhead Latch Setting the Ribbon Option Press Q to exit to the Main Menu Turn off the power and unplug the cord before proceeding Cleaning the Printhead and Platen RollerPrinthead Latch Lever Platen Roller Printhead Equipment Manual Replacing the Fuse Equipment Manual Problem Corrective Action TroubleshootingProblem Corrective Action Printer SpecificationsSupplies Page U.S.A Canada