Paxar 9406 manual Replacing the Fuse

Page 37

4. Replacing the Fuse

CAUTION

Turn off the power and unplug the printer before you replace the fuse.

The power supply cord is intended to serve as the disconnect device. The socket-outlet must be near the equipment and must be easily accessible.

1.Turn off the printer and unplug the cord.

Fuse

Cover

2.Facing the back of the printer, press and turn the fuse cover as shown until it pops out.

3.Pull the fuse out of the cover.

Replacing the Fuse

4-1

Image 37
Contents Equipment Manual Canadian D.O.C. Warning Preface System Administrators Guide Messages ManualEquipment Manual Table of Contents Equipment Manual Supplies Loading or Changing Supplies Move the printhead lever as shown to open the printhead Exit Ribbon Chute Supply Door Guide Edge Exit Chute Door Supply Edge Guide Sensor Remove the wire clip from the backing paper take-up reel Printhead Lever Backing Paper Take-Up Reel Removing Supplies Tear Backing Paper Here Wire Clip Backing Paper Take-up Reel Supplies Supply Loading Diagram Setting the Supply Type Option Supply Type Loading or Changing the Ribbon RibbonPull the exit chute door open Ribbon Supply Guide Open the printhead latch as shown Printhead Rollers Ribbon Take-up Reel Core Ribbon Take-up Reel Ribbon Supply Guide Removing the Ribbon Move the printhead lever to open the printhead Ribbon Delivery Reel Take-up Printhead Latch Setting the Ribbon Option Press Q to exit to the Main Menu Turn off the power and unplug the cord before proceeding Cleaning the Printhead and Platen RollerPrinthead Latch Lever Platen Roller Printhead Equipment Manual Replacing the Fuse Equipment Manual Problem Corrective Action TroubleshootingProblem Corrective Action Printer SpecificationsSupplies Page U.S.A Canada