Paxar 9406 manual Supply Type

Page 20

9406 Equipment Manual

5.Press E . You will see the previous setting, for example,

SUPPLY TYPE

Indexed

6.Press R or L until you see the option you want. Then press E . The printer will calibrate to check the supply and you will see

SUPPLY

Supply Type

7.Press Q to exit to the Setup menu.

8.Press Q to exit to the Main Menu.

NOTE: After changing settings in the Setup Menu, always return to the Main Menu before turning your printer off. Changes to these menus will not be saved if you turn the printer off before returning to the Main Menu.

1-14

Image 20

Contents Equipment Manual Canadian D.O.C. Warning System Administrators Guide Messages Manual PrefaceEquipment Manual Table of Contents Equipment Manual Supplies Loading or Changing Supplies Move the printhead lever as shown to open the printhead Exit Ribbon Chute Supply Door Guide Edge Exit Chute Door Supply Edge Guide Sensor Remove the wire clip from the backing paper take-up reel Printhead Lever Backing Paper Take-Up Reel Removing Supplies Tear Backing Paper Here Wire Clip Backing Paper Take-up Reel Supplies Supply Loading Diagram Setting the Supply Type Option Supply Type Ribbon Loading or Changing the RibbonPull the exit chute door open Ribbon Supply Guide Open the printhead latch as shown Printhead Rollers Ribbon Take-up Reel Core Ribbon Take-up Reel Ribbon Supply Guide Removing the Ribbon Move the printhead lever to open the printhead Ribbon Delivery Reel Take-up Printhead Latch Setting the Ribbon Option Press Q to exit to the Main Menu Cleaning the Printhead and Platen Roller Turn off the power and unplug the cord before proceedingPrinthead Latch Lever Platen Roller Printhead Equipment Manual Replacing the Fuse Equipment Manual Troubleshooting Problem Corrective ActionProblem Corrective Action Specifications PrinterSupplies Page U.S.A Canada