Paxar 9406 manual Loading or Changing the Ribbon

Page 21

2. The Ribbon

This chapter describes

•loading or changing the ribbon.

•removing the ribbon.

•setting the ribbon option.

Loading or Changing the Ribbon

1.Turn off the power.

2.Grasp the printer cover on both sides and lift it up.

Printer

Cover

The Ribbon

2-1

Image 21

Contents Equipment Manual Canadian D.O.C. Warning Preface System Administrators Guide Messages ManualEquipment Manual Table of Contents Equipment Manual Supplies Loading or Changing Supplies Move the printhead lever as shown to open the printhead Exit Ribbon Chute Supply Door Guide Edge Exit Chute Door Supply Edge Guide Sensor Remove the wire clip from the backing paper take-up reel Printhead Lever Backing Paper Take-Up Reel Removing Supplies Tear Backing Paper Here Wire Clip Backing Paper Take-up Reel Supplies Supply Loading Diagram Setting the Supply Type Option Supply Type Loading or Changing the Ribbon RibbonPull the exit chute door open Ribbon Supply Guide Open the printhead latch as shown Printhead Rollers Ribbon Take-up Reel Core Ribbon Take-up Reel Ribbon Supply Guide Removing the Ribbon Move the printhead lever to open the printhead Ribbon Delivery Reel Take-up Printhead Latch Setting the Ribbon Option Press Q to exit to the Main Menu Turn off the power and unplug the cord before proceeding Cleaning the Printhead and Platen RollerPrinthead Latch Lever Platen Roller Printhead Equipment Manual Replacing the Fuse Equipment Manual Problem Corrective Action TroubleshootingProblem Corrective Action Printer SpecificationsSupplies Page U.S.A Canada