Paxar 9406 manual Platen Roller Printhead

Page 35

3.Cleaning the Printhead and Platen Roller

4.Remove any supplies in the printer. See "Removing Supplies" for more information.

5.If there is a ribbon in the printer, remove it. See "Removing the Ribbon" for more information.

6.Lightly moisten a cotton swab with isopropyl (rubbing) alcohol.

CAUTION

Excessive alcohol could damage internal parts. Do not oversaturate the swab.

7.Rub the swab up and down the printhead as shown. Clean the platen roller the same way.

Platen

Roller

Printhead

8.Replace the ribbon. See "Loading or Changing the Ribbon" for more information.

3-3

Cleaning the Printhead and Platen Roller

Image 35

Contents Equipment Manual Canadian D.O.C. Warning Preface System Administrators Guide Messages ManualEquipment Manual Table of Contents Equipment Manual Supplies Loading or Changing Supplies Move the printhead lever as shown to open the printhead Exit Ribbon Chute Supply Door Guide Edge Exit Chute Door Supply Edge Guide Sensor Remove the wire clip from the backing paper take-up reel Printhead Lever Backing Paper Take-Up Reel Removing Supplies Tear Backing Paper Here Wire Clip Backing Paper Take-up Reel Supplies Supply Loading Diagram Setting the Supply Type Option Supply Type Loading or Changing the Ribbon RibbonPull the exit chute door open Ribbon Supply Guide Open the printhead latch as shown Printhead Rollers Ribbon Take-up Reel Core Ribbon Take-up Reel Ribbon Supply Guide Removing the Ribbon Move the printhead lever to open the printhead Ribbon Delivery Reel Take-up Printhead Latch Setting the Ribbon Option Press Q to exit to the Main Menu Turn off the power and unplug the cord before proceeding Cleaning the Printhead and Platen RollerPrinthead Latch Lever Platen Roller Printhead Equipment Manual Replacing the Fuse Equipment Manual Problem Corrective Action TroubleshootingProblem Corrective Action Printer SpecificationsSupplies Page U.S.A Canada