Color Key
Description of the color coding.
Figure 17 Color Key
Administration Settings
The Administration menu includes eight administration items:
■IP Setup
■Backup & Restore
■Firmware Upgrade
■Reset
■System Access
Administration Settings | 37 |
■System Name
■System Time
■SNMP
Modifying the IP Address Settings
To enable devices on the network to communicate with the Switch, you need to assign an IP address to it — either by DHCP or by assigning a static IP address.
To enable devices on the network to communicate with the Switch, the Switch will either obtain an IP address from a DHCP server (default operation), or if this is not successful, will allocate itself an IP address. You can use the console interface or the 3Com Switch Detect application (with certain limitations) to see what IP address the Switch will use.
Automatic IP Configuration
When you power on the Switch for the first time, it will, for a period of approximately 2 minutes, automatically request an IP address from a DHCP server. This is referred to as auto mode. If at the end of this period there has been no response from the DHCP server (if one is present in the network), it will allocate itself an Auto IP address.
The Switch will use the default IP address 169.254.x.y, where x and y are the last two bytes of its MAC address.