ipSetup
The ipSetup command allows the user to define an IP address on the device either manually or via a DHCP server.
Syntax
ipSetup
Default Configuration
No default IP address is defined for interfaces.
User Guidelines
When the IP address is configured manually by the user, the address must be in the range 0.0.0.0 through 223.255.255.255.
IP Addresses configured beyond the range of 224.0.0.0 are defined as multicast, experimental or broadcast addresses.
If a default gateway is configured manually, the
CLI Commands | 95 |
Example
The following example displays an IP address configured manually:
Select menu option: ipSetup
Enter configuration method (auto,manual)[auto]: manual
Enter IP Address | [0.0.0.0 | ]: | |
192.168.1.1 |
|
| |
Enter | Subnet Mask | [255.255.0.0 | ]: |
255.255.255.0 |
|
| |
Enter | Default Gateway | [192.168.1.254 | ]: |
Select management VLAN ID (1)[1]:
This operation may take up to 30 seconds.
Select menu option:
The following example displays an IP address obtained via a DHCP server:
Select menu option: ipSetup
Enter configuration method (auto,manual)[manual]: auto
Select management VLAN ID (1)[1]:
This operation may take up to 30 seconds.
Select menu option: