Bed_anl_.qxd 20.02.04 16:28 Seite 12
To achieve the best possible sound quality, you may connect the digital receiver to a HiFi amplifier. To do this, use a suita- ble cable to connect the cinch sockets Audio R and Audio L of the digital receiver with an input on your HiFi amplifier (e.g. CD or AUX; please note that the Phono input is not sui- table!).
4.5.2 Digital
Should your amplifier be equipped with an appropriate electri- cal or optical input, you may connect the sockets AUDIO OUT DIGITAL elektrical resp.. AUDIO OUT DIGITAL optical with the electrical resp. the optical input of your amplifier.
Depending on the channel selected, sampling rates of 32, 44,1 and 48 kHz are available.
Where broadcast, the Dolby
4.6 Unit with S-Video input (Hosiden)
hTo connect the
4.7 Serial Interface (RS 232)
The RS 232 interface serves to carry out
5 Initial installation
Once you have read the safety notes, and have connected the unit as described in Chapter 4, you may switch on the unit as described in Chapter 7. When the unit is switched on for the first time, the start window of the installation assistant is displayed: AutoInstall. (Fig.
To make the adjustments in each step of the installation, the remote control keys required are indicated.
You can exit from the initial installation procedure at any time by pressing the red function key. Press the green function key to return to the previous step of the installation. You can thus correct any mistakes made at any time.
If the initial installation is not carried out, or is aborted before completion, the unit will commence operation with a standard
The initial installation described here serves only as an example. The exact procedure of the intial installation will depend on the settings you choose to make.
Please follow closely the instructions given on the screen.
12