TechniSat S1 manual Audio/Video settings

Bed_anl_.qxd 20.02.04 16:28 Seite 17

6.3 Audio/Video settings

To optimize your digital receiver in conjunction with your tele- vision set, you can make further settings in the menu Audio /Video settings.

>Press the Menu key to display the Main Menu.

>Use the up/down arrow keys to mark the line

Settings.

>Confirm by pressing OK. The sub-menu Settings will be displayed. (Fig. 6-4)

>Now use the up/down arrow settings to mark the line

Audio/Video settings .

>Confirm by pressing OK. The menu Audio/Video settings will be displayed. (Fig. 6-5)

>Use the up/down arrow keys to move the marker around within the menu, in order to change the set- tings as indicated. Please also note the messages displayed on screen in some cases.

The following adjustments may be made:

6.3.1 Picture format TV set

>Use the left/right arrow keys to select the picture format appropriate for your TV set, 4:3 or 16:9. This function automatically adjusts the picture format for your television set.

6.3.2 Language (Audio signal)

>In this line, use the left/right arrow keys to select your preferred language. This function will automati- cally select the preferred language, where available, after a programme scan.

6.3.3 Language (Sub-titles)

The DVB receiver is equipped to display sub-titles on screen. These will be displayed automatically if the function Sub-titles has been activated, and if the sub-titles are being broadcast in the language selected.

If the function has not been activated, sub-titles can be acti-

vated manually. Sub-titles are indicated by the symbol in the information box. Please also note Point 7.13 of the opera- ting manual.

6.3.4 TV SCART mode

In this line, use the left/right arrow keys to select the appropriate mode for your TV set, either FBAS or RGB. The setting for standard sets is FBAS.

6.3.5 Video system

In this line you must set the appropriate television broadcast

(Fig. 6-1)

(Fig. 6-2)

(Fig. 6-3)

17