TechniSat S1 manual Switching DiSEqC on and off, Setting the switching matrix, Antenna settings

Page 19

Bed_anl_.qxd 20.02.04 16:28 Seite 19

The satellites selected by means of the installation assistant will be displayed in the menu Antenna settings. If the installation assistant was prematurely aborted, the satellite positions ASTRA and EUTELSAT are pre-programmed ex factory.

If you would also like to receive other satellites, or if you are using a different type of LNC, you can make the appropriate settings on your digital receiver as follows:

>Press Menu to call up the Main Menu. (Fig. 6-6)

>

Use the up/down arrow keys to mark the item

(Fig. 6-5)

 

Settings.

 

>Confirm by pressing OK.

The menu Settings will be displayed. (Fig. 6-7)

>Now use the up/down arrow keys to mark the item

Antenna settings.

>Confirm by pressing OK. The menu Antenna set- tings will be displayed. (Fig. 6-8)

The following settings may be made in this sub-menu:

6.4.1 Switching DiSEqC on and off

DiSEqC (Digital Satelliten Equipment Control) is a digital switching system used to control DiSEqC-compatible compo- nents via the antenna connection. If your external unit is equipped with DiSEqC components, you must activate the DiSEqC control function:

>In this line, use the OK key to switch DiSEqC on or off.

As only a single LNC can be controlled when the DiSEqC control function is switched off, the menu is limited to the configuration of a single LNC.

6.4.2 Setting the switching matrix

The menu lists the four switching criteria of the DiSEqC con- trol function. Your unit has been pre-programmed at the fac- tory to receive ASTRA at the switching position A/A and Eutelsat at the position B/A of a multi-switch. If the switching matrix of your reception installation be set up differently, or if it is set up to receive other satellites, you can adjust the set- tings of your digital receiver in accordance with the require- ments of your reception installation as follows.

>Use the arrow keys to select the DiSEqC switch position (1-4) to which you wish to allocate a satellite (e.g.. A/B 3 No Satellite), by marking this line.

>Confirm by pressing OK.

A table showing a number of different satellites will be displayed.

>Use the up/down arrow keys to mark the satellite required.

Use the up/down arrow keys to move the marker up or down one line at a time. Use the left/right

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents DiSEqC DigiCorder S1Contents Changing basic programming Hard drive operationPlayback 15.3 Managing the hard driveOperating a rotating antenna DiSEqC 1.2 Illustrations Remote control unitOutput IndexImportant notes on operating the unit Please read this firstSehr geehrte Kundin, sehr geehrter Kunde,7 Help Safety notesDisposal information Temporary disconnectionConnection to a television set Mains power connectionConnections External unitVCR Connecting the DVB receiver to a satellite installationVia HF cable Setting the UHF output channelVideo cassette recorder VCR HiFi AmplifierDigital Initial installationUnit with S-Video input Hosiden Serial Interface RSAudio language Country settingAntenna configuration Operating languageUpdating software When the scan is completedPosition A/Option B Position B/Option BOperating language SettingsBasic settings Exiting from the installation assistantCountry Remote control codeBasic Settings Time difference GMT hoursAudio/Video settings Dolby Digital AC3 Antenna settingsUHF output channel Setting the switching matrix Switching DiSEqC on and offAntenna settings Additional settings/LNC characteristics Operation Switching on and offRotary antenna Programme selection Using the programme up/down keysUsing the numeric keys Using the Navigator Programme listReception of encrypted programmes Accessing blocked programmesInformation box Option Special functionsMultifeed options Selecting a starting timeDolby Digital AC3 mode Volume controlSelecting another language Additional programme information TV/Radio switchingRevert to last programme selected Display time and programme informationVideo text Using the video text decoder of your televi- sion setUsing the internal video text decoder Freeze frameElectronic Programme Guide SFI SiehFern Info Mixed modeStop mode Sub-titlesAccessing electronic programme guide Interrupting download procedureDownloading SFI data Next Now table with current programme contentsMore SFI functions SFI timer programmingSFI Info SFI programme overview Deleting an SFI timer eventDisplay SFI overview of other programmes Recording Hard drive operationExiting from SFI Starting a recording manually and ending it auto- matically Instant recording Start and end recording manuallyStop Hard drive timer Timer recordingsVideo recorder timer Manual timer programming Changing timer programming Timer overviewDeleting timer programming Timeshift function Programming a new timer eventFast forward and Reverse PlayPlaying hard drive recordings Pause/Freeze frameManage hard drive Managing the hard driveEnding Play Managing recordingsParental control DeleteEditing 15.3.2Hard drive information Sleep timerConfiguring the Favourites list Changing basic programmingProviders Calling up programme list managementRadio Wish to work onMarking blocks of programmes Adding programmes to the Favourites listRemove Sorting programmes Deleting from the Total listSelecting a programme Programming the electronic programme guideProgramme guide Last used Start categoryOverview ProgrammesSFI channel Parental controlChanging the unit PIN PIN code Default settingMode Automatic scan Programme scanSatellite Scan modeSatellite scan Transponder scanAfter the scan Manual scanSorted Service settingsUnsorted Delete all programmes Activate default settingUpdating software Copying the settings System configurationEncryption system Eastern and Western limits Operating a rotary antenna installation DiSEqCDeleting existing limits Geo positioning Setting Western limitSet Eastern limit First decimal point Setting a satellite positionSetting user-defined satellite positions User satellite Automatic fine adjustment Autofocus Adjusting the satellite antennaTest transponder/LNC configuration Manual adjustment of antennaOrbital position xx found. Save satellite ? Saving a satellite positionCurrent satellite list AutofocusSelecting a satellite position Technical TermsDelete satellite position Reference positionCo-axial cable Data compression/MPEG1/MPEG2Frequency Frequency rangePolarisation plane Service voltageModulator Parabolic dishTechnical data Output Input analogueOutput digital Video parametersTroubleshooting guide Annexure AC3 IndexProgramme selection Using the programme up/down keys Switching on and offFor everyday operation Volume control Using the programme listBedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Problem Possible cause Solution Neously, and keep them Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite 151203/201/1 2233430000100 Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite 100 101 102

S1 specifications

TechniSat S1 is a cutting-edge device that combines advanced technology with user-friendly features, making it an ideal choice for those seeking an all-in-one solution for satellite TV and multimedia playback. Known for its reliable performance, the S1 stands out with a range of characteristics that cater to both casual viewers and tech-savvy enthusiasts.

One of the main features of the TechniSat S1 is its exceptional receiver capabilities. With support for various satellite formats, including DVB-S2, the S1 ensures high-definition picture quality and excellent sound performance. This allows users to enjoy a crystal-clear viewing experience for their favorite channels without interruption, whether they are watching live sports, movies, or documentaries.

In terms of multimedia functionality, the TechniSat S1 comes equipped with an integrated media player, enabling users to play content from USB drives or external hard drives. It supports a wide range of file formats, including popular video and audio codecs, making it versatile for different media types. Furthermore, the receiver features a built-in Electronic Program Guide (EPG), allowing users to navigate their viewing options with ease and plan recordings effectively.

Connectivity is another key aspect of the TechniSat S1. The device is designed with multiple ports, including HDMI, USB, and Ethernet, ensuring seamless integration with various home entertainment systems. The HDMI connection allows for easy setup with modern TVs, providing excellent audio and video quality. Additionally, its networking capabilities enable access to online streaming services and software updates, keeping the device up-to-date with the latest features and content.

The interface of the TechniSat S1 is user-friendly, featuring an intuitive menu system that simplifies navigation. Users can customize their viewing experience by creating favorites lists and setting reminders for upcoming shows. The device also supports interactive services and applications, enhancing the overall entertainment experience.

Durability and efficiency are also hallmarks of the TechniSat S1. Its sleek design not only fits well into any home decor, but its energy-efficient operation ensures lower electricity consumption. With these qualities, TechniSat S1 stands as a reliable investment for those looking to elevate their satellite television experience while enjoying the benefits of modern technology.
Top Page Image Contents