TechniSat S1 Input analogue, Output digital, Video parameters, Video text, Video Cinch, Display

Bed_anl_.qxd 20.02.04 16:29 Seite 66

(Fig. 9-12)

Output impedance	600 Ohm
THD	> 60 dB ( 1 kHz )
S/N	> 60 dB
Crosstalk	< - 65 dB
Input analogue:
Input level l/r	0,5 V r.m.s. (nominal)
Input impedance	> 40 kOhm
Volume at switch-on	Automatic use of last volume set-
Output digital:	ting
SP/DIF output	electrical, cinch socket
	optical, Toslink
Video parameters:	Dolby Digital AC3

Output:

Output level FBAS 1 Vs-s +/- 0.3 dB into 75 Ohms

Output level Y	1 Vs-s +/- 0.3 dB into 75 Ohms
Output level C		1 Vs-s +/- 0.3 dB into 75 Ohm
Output level RED	0,7 Vs-s +/- 0.1Vp-p into 75 Ohms
Output level GREEN0,7 Vs-s +/- 0.1Vp-p into 75 Ohms
Output level BLUE 0,7 Vs-s +/- 0.1Vp-p into 75 Ohms
S/N loaded		> 60 dB
Video text
Teletext filtering		corresponding to ETS 300 472
		Standard
Download Teletext data		(FBAS) corresponding to ITU-R
		BT.653-2 lines: 6-22 and 320-335
Soft video text		800 pages memory
TV SCART:
Output:		FBAS or RGB
VCR SCART:
Input:		FBAS
Output:	FBAS
Video Cinch:
Output		FBAS
S-VHS Hosiden socket:
Output		Y signal (luminance),
Hard drive:		C signal (chrominance)
Hard drive type		3,5 inch
Capacity	40 GB (Standard)
Hard drive control		provided for 20 to 120 GB
No. of recordings 1000 (max.)
Display:
Vacuum fluorescence		16 digit, 5x7 point matrix, 7 mm
		symbol height
Serial interface RS 232:
Type		RS 232, bidirectional
Bit rate		115,2 kBit/s max.
Connection		D-SUB socket, 9 pin

66