Bed_anl_.qxd 20.02.04 16:28 Seite 14
(Fig.
(Fig.
(Fig.
(Fig.
(Fig.
you wish to receive at the DiSEqC setting Position B/Option A, and confirm by pressing OK. (Fig.
Position A/Option B
>Use the arrow up/down keys to mark the satellite you wish to receive at the DiSEqC setting Position A/Option B, and confirm by pressing OK. (Fig.
Position B/Option B
>Use the arrow up/down keys to mark the satellite
you wish to receive at the DiSEqC setting Position B/Option B, and confirm by pressing OK. (Fig.
As your next step, check again on the configuration of your antenna.
>If you wish to accept this setting, use the arrow up/down keys to mark the field Yes, and confirm by pressing OK. (Fig.
Updating software
When you have confirmed the antenna settings, the digital receiver will automatically check whether a more
>Use the right/left arrow keys to select the field Update, and confirm by pressing OK. (Fig.
Scanning for programmes
Once you have checked on the software version, and possi- bly downloaded an updated version, you can proceed to searching for programmes.
>Use the up/down arrow keys to mark the field All Channels, if you wish to scan for both encrypted and
>Confirm your selection by pressing OK, the unit will perform an automatic programme search. All the satel- lites selected during the antenna configuration prove- dure will be scanned for programmes. This procedure may take several minutes. Please note any messages displayed on screen.
When the scan is completed
When the scan has been completed, the number of transpon- ders found, the number of programmes as well as the num- ber of new programmes found will be displayed. In addition,
14