Bed_anl_.qxd 20.02.04 16:28 Seite 35
>Switch to the channel that will broadcast the program- me you wish to record.
>Press the Record key to record the current program- me. The programme will continue to be displayed on the screen while the recording is running.
>Press the On/Standby key
A prompt will appear on screen, asking you whether you wish to record the current programme to the end.
>Use the left/right arrow keys to select Yes in order to record the current programme to the end.
>Confirm by pressing OK.
The receiver will record the entire programme, and will then remain in standby mode.
>If you switch on the receiver before the end of the recording procedure, please note the messages displayed on screen.
7.15.1.2 Timer recordings
You can use the hard drive timer to make recordings on the integrated hard drive in your absence. In addition, your digital receiver is equipped with a video recorder timer and a pro- gramme change timer. As far as the programming is concer- ned, the timer types differ only in their names.
You may programme the timers manually as described in this chapter, or with the help of the SFI function as described in Point 7.14.7.2.
1. Hard drive timer
This function will switch the digital receiver on and off for the selected programme, so that this can be recorded on the hard drive in your absence.
If the receiver was switched on by means of the hard drive timer, this will be indicated by “! PVR Timer” being shown on the display. Most of the remote control functions are disabled in order to prevent an accidental premature interruption of the recording. When the receiver is in standby mode, an active timer will be indicated by a clock symbol shown on the display.
2. Video recorder timer
Use the video recorder timer to switch the digital receiver on and off for a particular programme, so that this can be recor- ded on an external recorder, such as a video recorder, in your absence. Please note that you must programme your video recorder to record the programme.
If the receiver was switched on by the video recorder timer, this will be indicated by “! VCR Timer” being shown on the display. Most of the remote control functions are disabled in order to prevent an accidental premature interruption of the recording. When the receiver is in standby mode, an active timer will be indicated by a clock symbol shown on the
(Fig.
35