TechniSat S1 manual Time difference GMT hours, Country, Remote control code, Standby clock

Page 16

Bed_anl_.qxd 20.02.04 16:28 Seite 16

(Fig. 5-12)

(Fig. 5-13)

(Fig. 5-14)

(Fig. 5-15)

should still make some settings related to your individual pre- ferences.

>Press the Menu key to call up the Main Menu.

>Use the up/down arrow keys to mark the entry

Settings.

>Confirm by pressing OK. The sub-menu Settings will be displayed. (Fig. 6-2)

>Now use the up/down arrow keys to mark the entry

Basic Settings.

>Confrim by pressing OK. The menu Basic Settings will be displayed. (Fig. 6-3)

>Use the up/down arrow keys to move the marker around within the menu, and to change any of the indi- vidual positions. When selecting a menu item, please note any additional messages displayed on screen. The following settings may be made:

6.2.1 Time difference GMT (hours)

Your unit is equipped with a clock. This is synchronized via satellite with Greenwich Mean Time.

If you have selected the entry None under the heading Country (Point 6.2.3), you can simply set the unit clock to the correct local time by means of the right/left arrow keys. For Germany, this difference is +1 hour on standard time, and +2 hours during daylight savings time.

6.2.2 Country

This function provides for an automatic switch-over from stan- dard to daylight savings time.

>Go to the entry Country and use the left/right arrow keys to select you country of residence.

6.2.3 Remote control code

In this line you must decide whether your receiver should be allocated the remote control option SAT1 or SAT2.

>To make the selection, press the SAT1 resp. SAT2 key and the OK key simultaneously.

Press the Back key to return to the menu Settings, or press Menu to return to normal operation. The set- tings will be automatically stored in memory.

6.2.4 Standby clock

In this line you must decide whether the clock time should be displayed when the unit is in standby mode.

>In this line, you can use the left/right arrow keys to set the standby clock mode to on or off einstellen.

>Press Back to return to the menu Settings, or press Menu to return to normal operation. The settings will be automatically stored in memory.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DigiCorder S1 DiSEqCContents Hard drive operation Playback15.3 Managing the hard drive Changing basic programmingOperating a rotating antenna DiSEqC 1.2 Remote control unit IllustrationsIndex OutputImportant notes on operating the unit Please read this firstSehr geehrte Kundin, sehr geehrter Kunde,7 Safety notes Disposal informationTemporary disconnection HelpMains power connection ConnectionsExternal unit Connection to a television setConnecting the DVB receiver to a satellite installation VCRSetting the UHF output channel Video cassette recorder VCRHiFi Amplifier Via HF cableInitial installation Unit with S-Video input HosidenSerial Interface RS DigitalCountry setting Antenna configurationOperating language Audio languageWhen the scan is completed Position A/Option BPosition B/Option B Updating softwareSettings Basic settingsExiting from the installation assistant Operating languageRemote control code Basic SettingsTime difference GMT hours CountryAudio/Video settings Dolby Digital AC3 Antenna settingsUHF output channel Setting the switching matrix Switching DiSEqC on and offAntenna settings Additional settings/LNC characteristics Operation Switching on and offRotary antenna Using the programme up/down keys Using the numeric keysUsing the Navigator Programme list Programme selectionReception of encrypted programmes Accessing blocked programmesInformation box Special functions Multifeed optionsSelecting a starting time OptionDolby Digital AC3 mode Volume controlSelecting another language TV/Radio switching Revert to last programme selectedDisplay time and programme information Additional programme informationUsing the video text decoder of your televi- sion set Using the internal video text decoderFreeze frame Video textMixed mode Stop modeSub-titles Electronic Programme Guide SFI SiehFern InfoAccessing electronic programme guide Interrupting download procedureDownloading SFI data Next Now table with current programme contentsMore SFI functions SFI timer programmingSFI Info SFI programme overview Deleting an SFI timer eventDisplay SFI overview of other programmes Recording Hard drive operationExiting from SFI Starting a recording manually and ending it auto- matically Instant recording Start and end recording manuallyStop Hard drive timer Timer recordingsVideo recorder timer Manual timer programming Changing timer programming Timer overviewDeleting timer programming Programming a new timer event Timeshift functionPlay Playing hard drive recordingsPause/Freeze frame Fast forward and ReverseManaging the hard drive Ending PlayManaging recordings Manage hard driveParental control DeleteEditing Sleep timer Configuring the Favourites listChanging basic programming 15.3.2Hard drive informationCalling up programme list management RadioWish to work on ProvidersMarking blocks of programmes Adding programmes to the Favourites listRemove Deleting from the Total list Sorting programmesSelecting a programme Programming the electronic programme guideProgramme guide Start category OverviewProgrammes Last usedParental control SFI channelChanging the unit PIN PIN code Default settingMode Programme scan Automatic scanScan mode Satellite scanTransponder scan SatelliteManual scan After the scanSorted Service settingsUnsorted Delete all programmes Activate default settingUpdating software Copying the settings System configurationEncryption system Eastern and Western limits Operating a rotary antenna installation DiSEqCDeleting existing limits Geo positioning Setting Western limitSet Eastern limit Setting a satellite position First decimal pointSetting user-defined satellite positions User satellite Adjusting the satellite antenna Test transponder/LNC configurationManual adjustment of antenna Automatic fine adjustment AutofocusSaving a satellite position Current satellite listAutofocus Orbital position xx found. Save satellite ?Technical Terms Delete satellite positionReference position Selecting a satellite positionData compression/MPEG1/MPEG2 FrequencyFrequency range Co-axial cableService voltage ModulatorParabolic dish Polarisation planeTechnical data Input analogue Output digitalVideo parameters OutputTroubleshooting guide Annexure Index AC3Programme selection Using the programme up/down keys Switching on and offFor everyday operation Using the programme list Volume controlBedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Problem Possible cause Solution Neously, and keep them Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite 151203/201/1 2233430000100 Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite Bedanl.qxd 20.02.04 1630 Seite 100 101 102

S1 specifications

TechniSat S1 is a cutting-edge device that combines advanced technology with user-friendly features, making it an ideal choice for those seeking an all-in-one solution for satellite TV and multimedia playback. Known for its reliable performance, the S1 stands out with a range of characteristics that cater to both casual viewers and tech-savvy enthusiasts.

One of the main features of the TechniSat S1 is its exceptional receiver capabilities. With support for various satellite formats, including DVB-S2, the S1 ensures high-definition picture quality and excellent sound performance. This allows users to enjoy a crystal-clear viewing experience for their favorite channels without interruption, whether they are watching live sports, movies, or documentaries.

In terms of multimedia functionality, the TechniSat S1 comes equipped with an integrated media player, enabling users to play content from USB drives or external hard drives. It supports a wide range of file formats, including popular video and audio codecs, making it versatile for different media types. Furthermore, the receiver features a built-in Electronic Program Guide (EPG), allowing users to navigate their viewing options with ease and plan recordings effectively.

Connectivity is another key aspect of the TechniSat S1. The device is designed with multiple ports, including HDMI, USB, and Ethernet, ensuring seamless integration with various home entertainment systems. The HDMI connection allows for easy setup with modern TVs, providing excellent audio and video quality. Additionally, its networking capabilities enable access to online streaming services and software updates, keeping the device up-to-date with the latest features and content.

The interface of the TechniSat S1 is user-friendly, featuring an intuitive menu system that simplifies navigation. Users can customize their viewing experience by creating favorites lists and setting reminders for upcoming shows. The device also supports interactive services and applications, enhancing the overall entertainment experience.

Durability and efficiency are also hallmarks of the TechniSat S1. Its sleek design not only fits well into any home decor, but its energy-efficient operation ensures lower electricity consumption. With these qualities, TechniSat S1 stands as a reliable investment for those looking to elevate their satellite television experience while enjoying the benefits of modern technology.
Top Page Image Contents