Planet Technology IPX-1800N Add a User Group, Edit a User Group, Delete a User Group, Group ID

PLANET IP PBX user’s manual

		1.	Enter a usergroup name beside the ADD button, and then
			click ADD.
		2.	The name will show in Group ID.
		3.	Click the name in Group ID to view the edit page.
	Add a User Group	4.	Enter settings shown in Table 4.2.
		5.	Click SET to save the settings, and click BACK to return to
			the USERGROUP MANAGEMENT page.
		Now, you can see the newly added usergroup displayed in the
		Group ID.
		1.	Click a usergroup name in the Group ID.
	Edit a User Group	2.	Edit settings shown in Table 4.2.
		3.	Click SET.
	Delete a User Group	1.	Select a Group ID.
		2.	Click DEL to remove the usergroup from the Group ID.
Table 4.2 Usergroup Configuration Settings
Field				Description
Group ID				A unique group name containing alphabets, numbers, and
				underscore only without spaces; 32 characters maximum.
Description				Arbitrary description information.
Associated Trunks				Select outbound SIP trunks and PSTN trunks accessible by
				this usergroup. Note the order matters the hunting
				sequence in run-time.
				Group ID: The default number is “0”. A trunk with Group ID
				“0” does not form a balance group with any other trunks in
				Group 0. If Group ID is 1~9, trunks with the same Group ID
				form a usage balance group.
				Weight: the weight of a trunk to be selected in a trunk
				balance group for an outgoing call.
				) Trunks with the same group ID must be put together, or
				the function will not work.
				) If there is not any appropriate SIP trunk and PSTN trunks
				to select, come back later to revise selection once
				trunks have been created.