Planet Technology IPX-1800N user manual Meet-me Prompts

PLANET IP PBX user’s manual

1.Enter settings shown in Table 5.4.

2.Click APPLY.

Table 5.4 Voice Mail Configuration Settings

Field	Description
Voicemail Pilot Number	Number to access voice mail system IVR.
Minimum Message Time	Messages less than this duration will not be notified by e-
	mail. E.g., 3 (sec).
Maximum Message Time	Maximum duration allowed for a single message. E.g., 60
	(sec).
Maximum number of messages per	Maximum number of messages allowed per extension.
account
SMTP Server	Hostname or IP address of the SMTP server for voicemail
	notification.
E-mail from Address	Most SMTP servers require a valid from address to accept
	a mailing request.
Voicemail Available Space Check	Select to enable the Alarm Email function described below.
Send Alarm Email when Space	Set a threshold in minutes to send an alarm email to the
Below	administrator when the space left is below it.
	Show the available space in Kbytes and minutes.
	) The storage inside IP PBX saves not only voice mails but
Voicemail Space Left	also some other stuff, such as CDR and logs. The
	remained disk space is all for voice mails, and it is the
	“maximum” available voice mail space.
SMTP Server Account	Specify an account ID if the SMTP server requires
	authentication for outgoing mails.
SMTP Server Password	Specify the account password if the SMTP server requires
	authentication for outgoing mails.

5.5Meet-me Prompts

This page allows replacing built-in meet-me conference prompts with user recordings.

1.Click a language and a prompt in the corresponding lists.

2.Find a corresponding recording in the local storage.

3.Click PUT FILE to complete the replacement.

4.To reset a prompt back to default, leave the Upload box in blank and directly click the PUT FILE.

Note that the replacement is done for the selected Language and Prompt only. Currently only following prompts could be replaced.