Planet Technology IPX-1800N Add Dhcp Range, Edit Dhcp Range, Delete Dhcp Range, Show Clients

PLANET IP PBX user’s manual

Note: If the IP PBX was shut down abnormally, Select Service -> DHCP Service and click APPLY, or Go to Service -> IP PBX Service, and click RESTART to active the DHCP service.

	1.	Click CLEAR.
	2.	Enter a pool name (must have an alphabet initial) in Pool
		Name.
	3.	Select Single-hostto enter an IP address of the host with
		MAC, if the binding is intended for a specific host only.
	4.	Enter a DHCP range of addresses available for lease in IP.
		The right address box will not show if Single-hostis
Add DHCP Range		selected.
	5.	Optionally, DHCP options1 could be configured by
		entering an option code and value in Code,Value and click
		ADD. The new DHCP option will show in the OPTIONS
		list. To delete an option, choose it from the OPTIONS list
		and click DEL after the box.
	6.	Click ADD at the bottom of the page to commit changes.
	You can see the newly added DHCP POOL displayed in the
	DHCP POOL list.
	1.	Click any pool name in the DHCP POOL list to see the
		settings on the right.
Edit DHCP Range	2.	Edit the settings.
	3.	Click UPDATE to change the settings.
	1.	Click any pool name in the DHCP POOL list.
Delete DHCP Range	2.	Click DEL to remove the pool name from the DHCP POOL
		list.
Show Clients	Click SHOW CLIENTS to see all leased LAN IP addresses and
	client details.
Disable DHCP Service	Click Disable, and click APPLY.

1Refer to RFC 2132 for the details of available DHCP options.