Planet Technology IPX-1800N user manual Did Stripping, IVR List8, Usergroup9 of Privilege

PLANET IP PBX user’s manual

	after stripping.
	A number of leading digits to be stripped from the original
	called number. If prefix or stripping has been given but DID
DID Stripping	of Extension is not bynumber, the result of digit
	manipulation is dialed in a DTMF string after the call has
	been answered by the DID extension as an automatic 2nd
	dialing.
Language	Preferred language for system instructions heard from the
	trunk.
IVR List8	Associate an IVR menu with incoming calls to this trunk.
	This is mandatory unless the trunk is configured for DID.
	When disabled DID, click a usergroup in the list whose
	reachability to other usergroups and trunks will be used as
Usergroup9 of Privilege	the privilege of inbound calls from this trunk.
	) There may not be appropriate usergroups to select
	initially. One can come back later once the expected
	usergroup has been added.
Advanced Settings	Select to see more settings shown below.
	Select a preferred DTMF mode, RFC 2833 or SIP INFO, for
	this trunk in the list. This must match configuration on the
DTMF Mode	server side. If the user does not know the DTMF mode on
	the server side, select Not sure from the list, and SDP will
	automatically detect the DTMF mode is Inband or
	RFC2833.
	Click NO to disable or IP PBX will attempt to notify the two
	peers in a conversation to try peer-to-peer RTP
	transmission. This is suggested as long as phone and ITSP
Try Peer-to-peer RTP	side support INVITE or UPDATE method during a
	connected call to save the resource of IP PBX. However,
	only SIP INFO DTMF mode should enable this since other
	DTMF modes require IP PBX being RTP relay server to
	support in-line transfer.
Bandwidth Sensitive	Indicate the trunk is over a bandwidth-sensitive link, e.g.
	across Internet.
Bandwidth Limitation	Leave it blank to disable or, specifies a limit of bandwidth in
	kbps for call admission.

8Please refer to 0 for details.

9Please refer to 4.2 for details.