Powerware 9315 UPS operation manual Meters Printout Ctrl+M, System Meters

Communication

7.6.3 Meters Printout – [Ctrl]+[M]

This key sequence prints the current readings of the UPS system meters. The input area shows the phase-to-phase voltage, frequency, and phase current of the incoming utility, followed by the kVA, kW, and power factor measurements. The output area shows the same information for the power being output by the UPS. The Bypass area shows the phase-to-phase voltage of the bypass source. The Battery area displays the DC voltage (V) and the DC current (I). Figure 7-7shows a sample Meters printout.

		Uninterruptible Power System
UPS System Normal						03 JAN 1997 14:22:49
Alarm:	None
Notice:	None
		Input				Output
VAB		VBC	VCA FREQ		VAB	VBC	VCA		FREQ
480		480	480 60.0		480	480	480		60.0
	IA	IB		IC	IA	IB	IC		IN
	480	480		480	361	361	361		0
	KVA	KW		PF		KVA	KW		PF
	399	379		0.95		300	240	0.80
		Bypass				Battery
	VAB	VBC		VCA		V	+		I
	480	480		480		540			0

Figure 7-7. System Meters

EATON Powerware® 9315 UPS (200–300 kVA) Operation Manual S 164201036 Rev G www.powerware.com 7−11