Installing the Heatsink
1.Do not apply any thermal grease to the heatsink or the CPU die; the required amount has already been applied.
2.Place the heatsink on top of the CPU so that the four mounting holes are aligned with those on the retention mechanism.
3.Screw in two diagonal screws (ie the #1 and the #2 screws) until just snug (- do not fully tighten the screws to avoid possible damage to the CPU.)
4.Finish the installation by fully tighten- ing all four screws.
CEK Passive Heatsink
Screw#1 Screw#2
Screw#1
Screw#2
To Remove the Heatsink
Warning: We do not recommend that the CPU or the heatsink be removed.
!However, if you do need to uninstall the heatsink, please follow the instructions on the next page to uninstall the heatsink to prevent damage done to the CPU or the CPU socket.
1.Unscrew and remove the heatsink screws from the motherboard in the sequence as shown in the picture on the right.
2. Hold the heatsink as shown in the pic- ture on the right and gently wriggle the heatsink to loosen it from the CPU. (Do not use excessive force when wriggling the heatsink!!)
3. Once the heatsink is loosened, remove the it from the CPU socket.