SUPER MICRO Computer 6015W-UR, 6015W-NTR user manual Server Chassis Features

Page 11

Chapter 1: Introduction

include one COM port, a VGA (monitor) port, two USB 2.0 ports, PS/2 mouse and keyboard ports and two gigabit Ethernet ports.

ATI Graphics Controller

The X7DWU features an integrated ATI video controller based on the ES1000 graph- ics chip. The ES1000 was designed speciﬁ cally for servers, featuring low power consumption, high reliability and superior longevity.

Other Features

Other onboard features that promote system health include onboard voltage moni- tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus protection and BIOS rescue.

1-3 Server Chassis Features

The 6015W-UR/6015W-NTR is built upon the SC815TQ-R650U chassis while the 6015W-U/6015W-NT is built upon the SC815TQ-560U chassis. The following is a general outline of the main features of both chassis.

System Power

The SC815TQ-R650U features a redundant 650W power supply consisting of two power modules. The system does not need to be shut down when replacing or removing a single power supply module.

The SC815TQ-560U features a single 560W power supply module. The system must be shut down when replacing or removing this power supply module.

SATA Subsystem

The SC815TQ-R650U/SC815TQ-560U chassis was designed to support four hot- swap SATA hard drives. Note: In the 6015W-NTR/6015W-NT, SATA drives are connected to the onboard SATA ports.

PCI Expansion Slots

6015W-UR/6015W-U: A riser card on the right side of the chassis can support one PCI-E x8 card (with a maximum length of 5.5"). The left side supports a UIO card and one PCI-E x8 card. These two systems can support four SAS/SATA drives with an optional UIO SAS card. See our web site for details (http://www.supermicro. com/products/nfo/UIO.cfm).

1-3

Image 11

Contents Super Manual Revision 1.0a Release Date April 23 Manual Organization PrefaceAbout This Manual System Safety Preface Table of Contents System Interface Bios Overview Chapter IntroductionServerboard Features Server Chassis Features Cooling System Front Control PanelBackplane CPU1 CPU2 Asia-Paciﬁc Contacting SupermicroHeadquarters EuropeUnpacking the System Chapter Server InstallationPreparing for Setup Server Precautions Choosing a Setup LocationRack Precautions Rack Mounting Considerations Ambient Operating TemperatureIdentifying the Sections of the Rack Rails Installing the System into a RackInstalling the Inner Rails Installing the Rack Rails Installing the Outer RailsInstalling the Server into a Rack Installing the Server into the RackInstalling the Server into a Telco Rack Installing the Server into a Telco RackChecking the Components Checking the Serverboard SetupAccessing the Inside of the System Checking the Drives Checking the Drive Bay SetupChecking the Airﬂow Providing PowerControl Panel Buttons ResetChapter System Interface Universal Information LED PowerControl Panel LEDs NIC2 Sata Drive Carrier LEDs Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsUnpacking Chapter Advanced Serverboard SetupPrecautions Handling the ServerboardInstalling the Processor Processor and Heatsink InstallationPage Removing the Heatsink Installing the HeatsinkConnecting the Control Panel Connecting CablesConnecting Data Cables Connecting Power CablesI/O Ports Front Control Panel Header Pins JF1Memory Support Installing MemoryInstalling DIMMs Installing Dimm into Slot PCI Slot/Card Conﬁgurations PCI Card InstallationAdding PCI Cards PCI Expansion SlotsSuper X7DWU Layout Serverboard DetailsX7DWU Quick Reference Jumper Description Default SettingConnector Deﬁnitions Universal Information LED HDD LEDUniversal Serial Bus USB0/1 Power Fail LEDReset Button Power ButtonFan Headers Universal Serial Bus HeadersSerial Ports Wake-On-LAN Power LED/SpeakerATX PS/2 Keyboard and PS/2 Mouse Ports Overheat LEDLAN1/2 Ethernet Ports Wake-On-RingExplanation of Jumpers Jumper SettingsCmos Clear VGA Enable/DisablePower Force On LAN Enable/DisableMemory Voltage Select Watch Dog Enable/DisableI2C Enable/Disable LAN1/LAN2 LEDs Onboard IndicatorsFloppy, IDE and Sata Drive Connections Floppy ConnectorSata Ports IDE ConnectorDriver Installation Display Screen Installing DriversStatic-Sensitive Devices Chapter Advanced Chassis SetupChassis Front and Rear Views Control PanelReplacing System Fans System FansSystem Fan Failure Removing the Front Bezel Drive Bay Installation/RemovalRemoving the Front Bezel Accessing the Drive BaysMounting a Sata Drive in a Drive Carrier Sata Drive InstallationRemoving a Sata Drive from the Server Installing/Removing a Sata DriveRemoving the Chassis Cover DVD-ROM and Floppy Drive InstallationRemoving/Installing a Drive 6015W-UR/6015W-NTR Power SupplyReplacing the Power Supply 6015W-U/6015W-NT Removing/Replacing the Power Supply Page Introduction ChapterPress the Delete key to enter Setup Running SetupMain Bios Setup Default settings are in bold text unless otherwise notedSystem Date Main Bios Setup Menu Main Setup FeaturesBios Date System TimeCHS Format IDE Channel 0 Master/Slave and Secondary IDE Master/ SlaveType LBA Format LBA Mode ControlTransfer Mode Ultra DMA ModeSata Ahci Available when Sata RAID is Disabled Native Mode OperationSerial ATA Sata RAID Enable ICH RAID Code Base Available when Sata RAID is EnabledQuietBoot Mode Advanced SetupBoot Features QuickBoot ModeSet Power On Password Acpi ModePower Button Behavior EFI OS BootMemory Cache PCI Conﬁguration Advanced Chipset Control 4GB PCI Hole Granularity Memory Branch ModeIntel VT for Directed I/O Memory VoltageAMB Thermal Sensor High Temperature Dram OperationEnhanced x8 Detection Demand ScrubbingAdvanced Processor Options Direct Cache Access Available when supported by the CPU C1/C2 Enhanced Mode Available when supported by the CPUExecute Disable Bit Available when supported by the CPU Hardware Prefetcher Available when supported by the CPUDevice Conﬁguration DMI Event Logging Hardware Monitor Logic Console RedirectionVoltage Monitoring Fan Speed Control ModesTimer for Loading OS Minutes Abled Bios Post ErrorsAbled Bios Post Watch Dog OS Boot Watch DogRealtime Sensor Data System Event Log/System Event Log List ModeSecurity Supervisor Password IsUser Password Is Set Supervisor PasswordCurrent TPM State Set User PasswordPassword on Boot TPM Trusted Platform Modules SupportBoot Priority Order/Excluded from Boot Orders BootExit Page Appendix a Bios Post Messages Check date and time settings System Cmos checksum bad Default conﬁguration usedSystem timer error Real time clock errorEntering Setup System cache error Cache disabledFail-Safe Timer NMI Failed Allocation Error for deviceDevice IRQ conﬂict PS/2 Mouse Boot Summary ScreenFixed Disk n Invalid System Conﬁguration DataVideo Bios shadowed Press F1 to resume, F2 to Setup, F3 for previousPress F2 to enter Setup System Bios shadowedPage Terminal Post Errors Appendix B Bios Post CodesRecoverable Post Errors RAM failure on data bits xxxx* of low byte of memory bus Post Code Description Inform RomPilot about the end of Post optional Following are for boot block in Flash ROM Page Processors Appendix C System SpeciﬁcationsExpansion Slots see -6 for details ChassisOperating Environment