SUPER MICRO Computer 6015W-UR, 6015W-NTR user manual Appendix a Bios Post Messages

Page 95

Appendix A: BIOS POST Messages

Appendix A

BIOS POST Messages

During the Power-On Self-Test (POST), the BIOS will check for problems. If a problem is found, the BIOS will activate an alarm or display a message. The fol- lowing is a list of such BIOS messages.

Failure Fixed Disk

Fixed disk is not working or not confi gured properly. Check to see if fi xed disk is attached properly. Run Setup. Find out if the fi xed-disk type is correctly identifi ed.

Stuck key

Stuck key on keyboard.

Keyboard error

Keyboard not working.

Keyboard Controller Failed

Keyboard controller failed test. May require replacing keyboard controller.

Keyboard locked - Unlock key switch

Unlock the system to proceed.

Monitor type does not match CMOS - Run SETUP

Monitor type not correctly identifi ed in Setup

Shadow Ram Failed at offset: nnnn

Shadow RAM failed at offset nnnn of the 64k block at which the error was de-

tected.

System RAM Failed at offset: nnnn

System RAM failed at offset nnnn of in the 64k block at which the error was de-

tected.

Extended RAM Failed at offset: nnnn Extended memory not working or not con- fi gured properly at offset nnnn.

System battery is dead - Replace and run SETUP

The CMOS clock battery indicator shows the battery is dead. Replace the battery and run Setup to reconfi gure the system.

A-1

Image 95
Contents Super Manual Revision 1.0a Release Date April 23 Manual Organization PrefaceAbout This Manual System Safety Preface Table of Contents System Interface Bios Overview Chapter IntroductionServerboard Features Server Chassis Features Cooling System Front Control PanelBackplane CPU1 CPU2 Asia-Pacific Contacting SupermicroHeadquarters EuropeUnpacking the System Chapter Server InstallationPreparing for Setup Server Precautions Choosing a Setup LocationRack Precautions Rack Mounting Considerations Ambient Operating TemperatureIdentifying the Sections of the Rack Rails Installing the System into a RackInstalling the Inner Rails Installing the Rack Rails Installing the Outer RailsInstalling the Server into a Rack Installing the Server into the RackInstalling the Server into a Telco Rack Installing the Server into a Telco RackChecking the Components Checking the Serverboard SetupAccessing the Inside of the System Checking the Drives Checking the Drive Bay SetupChecking the Airflow Providing PowerControl Panel Buttons ResetChapter System Interface Universal Information LED PowerControl Panel LEDs NIC2 Sata Drive Carrier LEDs Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsUnpacking Chapter Advanced Serverboard SetupPrecautions Handling the ServerboardInstalling the Processor Processor and Heatsink InstallationPage Removing the Heatsink Installing the HeatsinkConnecting the Control Panel Connecting CablesConnecting Data Cables Connecting Power CablesI/O Ports Front Control Panel Header Pins JF1Memory Support Installing MemoryInstalling DIMMs Installing Dimm into Slot PCI Slot/Card Configurations PCI Card InstallationAdding PCI Cards PCI Expansion SlotsSuper X7DWU Layout Serverboard DetailsX7DWU Quick Reference Jumper Description Default SettingConnector Definitions Universal Information LED HDD LEDUniversal Serial Bus USB0/1 Power Fail LEDReset Button Power ButtonFan Headers Universal Serial Bus HeadersSerial Ports Wake-On-LAN Power LED/SpeakerATX PS/2 Keyboard and PS/2 Mouse Ports Overheat LEDLAN1/2 Ethernet Ports Wake-On-RingExplanation of Jumpers Jumper SettingsCmos Clear VGA Enable/DisablePower Force On LAN Enable/DisableMemory Voltage Select Watch Dog Enable/DisableI2C Enable/Disable LAN1/LAN2 LEDs Onboard IndicatorsFloppy, IDE and Sata Drive Connections Floppy ConnectorSata Ports IDE ConnectorDriver Installation Display Screen Installing DriversStatic-Sensitive Devices Chapter Advanced Chassis SetupChassis Front and Rear Views Control PanelReplacing System Fans System FansSystem Fan Failure Removing the Front Bezel Drive Bay Installation/RemovalRemoving the Front Bezel Accessing the Drive BaysMounting a Sata Drive in a Drive Carrier Sata Drive InstallationRemoving a Sata Drive from the Server Installing/Removing a Sata DriveRemoving the Chassis Cover DVD-ROM and Floppy Drive InstallationRemoving/Installing a Drive 6015W-UR/6015W-NTR Power SupplyReplacing the Power Supply 6015W-U/6015W-NT Removing/Replacing the Power Supply Page Introduction ChapterPress the Delete key to enter Setup Running SetupMain Bios Setup Default settings are in bold text unless otherwise notedSystem Date Main Bios Setup Menu Main Setup FeaturesBios Date System TimeCHS Format IDE Channel 0 Master/Slave and Secondary IDE Master/ SlaveType LBA Format LBA Mode ControlTransfer Mode Ultra DMA ModeSata Ahci Available when Sata RAID is Disabled Native Mode OperationSerial ATA Sata RAID Enable ICH RAID Code Base Available when Sata RAID is EnabledQuietBoot Mode Advanced SetupBoot Features QuickBoot ModeSet Power On Password Acpi ModePower Button Behavior EFI OS BootMemory Cache PCI Configuration Advanced Chipset Control 4GB PCI Hole Granularity Memory Branch ModeIntel VT for Directed I/O Memory VoltageAMB Thermal Sensor High Temperature Dram OperationEnhanced x8 Detection Demand ScrubbingAdvanced Processor Options Direct Cache Access Available when supported by the CPU C1/C2 Enhanced Mode Available when supported by the CPUExecute Disable Bit Available when supported by the CPU Hardware Prefetcher Available when supported by the CPUDevice Configuration DMI Event Logging Hardware Monitor Logic Console RedirectionVoltage Monitoring Fan Speed Control ModesTimer for Loading OS Minutes Abled Bios Post ErrorsAbled Bios Post Watch Dog OS Boot Watch DogRealtime Sensor Data System Event Log/System Event Log List ModeSecurity Supervisor Password IsUser Password Is Set Supervisor PasswordCurrent TPM State Set User PasswordPassword on Boot TPM Trusted Platform Modules SupportBoot Priority Order/Excluded from Boot Orders BootExit Page Appendix a Bios Post Messages Check date and time settings System Cmos checksum bad Default configuration usedSystem timer error Real time clock errorEntering Setup System cache error Cache disabledFail-Safe Timer NMI Failed Allocation Error for deviceDevice IRQ conflict PS/2 Mouse Boot Summary ScreenFixed Disk n Invalid System Configuration DataVideo Bios shadowed Press F1 to resume, F2 to Setup, F3 for previousPress F2 to enter Setup System Bios shadowedPage Terminal Post Errors Appendix B Bios Post CodesRecoverable Post Errors RAM failure on data bits xxxx* of low byte of memory bus Post Code Description Inform RomPilot about the end of Post optional Following are for boot block in Flash ROM Page Processors Appendix C System SpecificationsExpansion Slots see -6 for details ChassisOperating Environment