SUPER MICRO Computer 6015W-UR Acpi Mode, Power Button Behavior, Resume On Modem Ring, EFI OS Boot

Page 76

SUPERSERVER 6015W-UR/6015W-U/6015W-NTR/6015W-NT User's Manual

ACPI Mode

Use the setting to determine if you want to employ ACPI (Advanced Confi guration and Power Interface) power management on your system. The options are Yes and No.

Power Button Behavior

If set to Instant-Off, the system will power off immediately as soon as the user hits the power button. If set to 4-sec., the system will power off when the user presses the power button for 4 seconds or longer. The options are Instant-Offand 4-sec override.

Resume On Modem Ring

Select On to “wake your system up” when an incoming call is received by your modem. The options are On and Off.

EFI OS Boot

If enabled, this feature provides support for EFI OS booting. The options are En- abled and Disabled.

Keyboard On Now Function

This feature allows the user to determine how to use the keyboard to power on the system from S3~S5 States. Select Space to allow the user to power on the system by pressing the space bar. Select Password to allow the user to enter the password to power on the system. Select Disabled to disable this function.

Set Power On Password

When Password is selected on the item above, the user will be prompted to key in a password of 5-letter long to be used to power on the system.

Power Loss Control

This setting allows you to choose how the system will react when power returns after an unexpected loss of power. The options are Stay Off, Power On and Last State.

Watch Dog

If enabled, this option will automatically reset the system if the system is not active for more than 5 minutes. The options are Enabled and Disabled.

Summary Screen

This setting allows you to Enable or Disable the summary screen which displays the system confi guration during bootup.

7-8

Image 76
Contents Super Manual Revision 1.0a Release Date April 23 About This Manual PrefaceManual Organization System Safety Preface Table of Contents System Interface Bios Chapter Introduction OverviewServerboard Features Server Chassis Features Backplane Front Control PanelCooling System CPU1 CPU2 Contacting Supermicro HeadquartersEurope Asia-PacificPreparing for Setup Chapter Server InstallationUnpacking the System Rack Precautions Choosing a Setup LocationServer Precautions Ambient Operating Temperature Rack Mounting ConsiderationsInstalling the Inner Rails Installing the System into a RackIdentifying the Sections of the Rack Rails Installing the Outer Rails Installing the Rack RailsInstalling the Server into the Rack Installing the Server into a RackInstalling the Server into a Telco Rack Installing the Server into a Telco RackAccessing the Inside of the System Checking the Serverboard SetupChecking the Components Checking the Drive Bay Setup Checking the DrivesProviding Power Checking the AirflowChapter System Interface ResetControl Panel Buttons Control Panel LEDs PowerUniversal Information LED NIC2 Sata Drive Carrier LEDs Chapter System Safety Electrical Safety PrecautionsGeneral Safety Precautions ESD Precautions Operating Precautions Installing the Onboard BatteryChapter Advanced Serverboard Setup PrecautionsHandling the Serverboard UnpackingProcessor and Heatsink Installation Installing the ProcessorPage Installing the Heatsink Removing the HeatsinkConnecting Cables Connecting Data CablesConnecting Power Cables Connecting the Control PanelFront Control Panel Header Pins JF1 I/O PortsInstalling DIMMs Installing MemoryMemory Support Installing Dimm into Slot PCI Card Installation Adding PCI CardsPCI Expansion Slots PCI Slot/Card ConfigurationsServerboard Details Super X7DWU LayoutJumper Description Default Setting X7DWU Quick ReferenceConnector Definitions HDD LED Universal Information LEDPower Fail LED Reset ButtonPower Button Universal Serial Bus USB0/1Serial Ports Universal Serial Bus HeadersFan Headers Power LED/Speaker ATX PS/2 Keyboard and PS/2 Mouse PortsOverheat LED Wake-On-LANWake-On-Ring LAN1/2 Ethernet PortsJumper Settings Explanation of JumpersVGA Enable/Disable Power Force OnLAN Enable/Disable Cmos ClearI2C Enable/Disable Watch Dog Enable/DisableMemory Voltage Select Onboard Indicators LAN1/LAN2 LEDsFloppy Connector Floppy, IDE and Sata Drive ConnectionsIDE Connector Sata PortsInstalling Drivers Driver Installation Display ScreenChapter Advanced Chassis Setup Static-Sensitive DevicesControl Panel Chassis Front and Rear ViewsSystem Fan Failure System FansReplacing System Fans Drive Bay Installation/Removal Removing the Front BezelAccessing the Drive Bays Removing the Front BezelSata Drive Installation Mounting a Sata Drive in a Drive CarrierInstalling/Removing a Sata Drive Removing a Sata Drive from the ServerRemoving/Installing a Drive DVD-ROM and Floppy Drive InstallationRemoving the Chassis Cover Replacing the Power Supply Power Supply6015W-UR/6015W-NTR 6015W-U/6015W-NT Removing/Replacing the Power Supply Page Chapter IntroductionRunning Setup Main Bios SetupDefault settings are in bold text unless otherwise noted Press the Delete key to enter SetupMain Bios Setup Menu Main Setup Features Bios DateSystem Time System DateType IDE Channel 0 Master/Slave and Secondary IDE Master/ SlaveCHS Format LBA Mode Control Transfer Mode Ultra DMA Mode LBA FormatNative Mode Operation Serial ATA Sata RAID EnableICH RAID Code Base Available when Sata RAID is Enabled Sata Ahci Available when Sata RAID is DisabledAdvanced Setup Boot FeaturesQuickBoot Mode QuietBoot ModeAcpi Mode Power Button BehaviorEFI OS Boot Set Power On PasswordMemory Cache PCI Configuration Advanced Chipset Control Memory Branch Mode Intel VT for Directed I/OMemory Voltage 4GB PCI Hole GranularityHigh Temperature Dram Operation Enhanced x8 DetectionDemand Scrubbing AMB Thermal SensorAdvanced Processor Options C1/C2 Enhanced Mode Available when supported by the CPU Execute Disable Bit Available when supported by the CPUHardware Prefetcher Available when supported by the CPU Direct Cache Access Available when supported by the CPUDevice Configuration DMI Event Logging Console Redirection Hardware Monitor LogicFan Speed Control Modes Voltage MonitoringAbled Bios Post Errors Abled Bios Post Watch DogOS Boot Watch Dog Timer for Loading OS MinutesSystem Event Log/System Event Log List Mode Realtime Sensor DataSupervisor Password Is User Password IsSet Supervisor Password SecuritySet User Password Password on BootTPM Trusted Platform Modules Support Current TPM StateBoot Boot Priority Order/Excluded from Boot OrdersExit Page Appendix a Bios Post Messages System Cmos checksum bad Default configuration used System timer errorReal time clock error Check date and time settingsSystem cache error Cache disabled Fail-Safe Timer NMI FailedAllocation Error for device Entering SetupPS/2 Mouse Boot Summary Screen Fixed Disk nInvalid System Configuration Data Device IRQ conflictPress F1 to resume, F2 to Setup, F3 for previous Press F2 to enter SetupSystem Bios shadowed Video Bios shadowedPage Recoverable Post Errors Appendix B Bios Post CodesTerminal Post Errors RAM failure on data bits xxxx* of low byte of memory bus Post Code Description Inform RomPilot about the end of Post optional Following are for boot block in Flash ROM Page Appendix C System Specifications ProcessorsChassis Expansion Slots see -6 for detailsOperating Environment