Chapter 5: Advanced Serverboard Setup
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table on the right for pin defi nitions.
HDD LED
The HDD (IDE Hard Disk Drive) LED connection is located on pins 13 and 14 of JF1. Attach the IDE hard drive LED cable to display disk activity. Refer to the table on the right for pin defi nitions.
NIC1 LED
The NIC1 (Network Interface Control- ler) LED connection is located on pins 11 and 12 of JF1. Attach the NIC1 LED cable to display network activity. Refer to the table on the right for pin defi nitions.
NIC2 LED
The NIC2 (Network Interface Control- ler) LED connection is located on pins 9 and 10 of JF1. Attach the NIC2 LED cable to display network activity. Refer to the table on the right for pin defi nitions.
Overheat/Fan Fail LED
Connect an LED to the OH connection on pins 7 and 8 of JF1 to provide ad- vanced warning of chassis overheat- ing. Refer to the table on the right for pin defi nitions.
Power LED
Pin Definitions (JF1)
Pin# Defi nition
15Vcc
16Control
HDD LED
Pin Definitions (JF1)
Pin# Defi nition
13Vcc
14HD Active
NIC1 LED
Pin Definitions (JF1)
Pin# Defi nition
11Vcc
12NIC1 Active
NIC2 LED
Pin Definitions (JF1)
Pin# Defi nition
9Vcc
10 | NIC2 Active |
|
|
OH/Fan Fail LED
Pin Definitions (JF1)
Pin# Defi nition
7Vcc
8Control